Surfactant-free commercial electroless bath with low concentration of SiC nanoparticles to prepare the NiP-SiC nanocomposite coatings
نویسندگان
چکیده
منابع مشابه
Influences of Bath Stirring Rate on Synetics of Nano Composite Ni-SiC-Gr Coatings on St37 via Electrodeposition Process
In this study, electrochemical deposition of Ni-SiC-Gr nano composites was studied. The Watts bath was used for electrodeposition. The SiC and graphite powders were suspended in the electrolyte and stirred. The effects of changes in bath stirring rate on the composite coating were investigated. The X-Ray diffraction (XRD), scanning electron microscopy (SEM) and field emission scanning electron ...
متن کاملAnalyzing and Modelling the Corrosion Behavior of Ni/Al2O3, Ni/SiC, Ni/ZrO2 and Ni/Graphene Nanocomposite Coatings
A study has been presented on the effects of intrinsic mechanical parameters, such as surface stress, surface elastic modulus, surface porosity, permeability and grain size on the corrosion failure of nanocomposite coatings. A set of mechano-electrochemical equations was developed by combining the popular Butler-Volmer and Duhem expressions to analyze the direct influence of mechanical paramete...
متن کاملPreparation of β-SiC Coatings Using 1,2-Dimethyldisilane as Precursor
A cold-wall upstream reactor was designed to study the deposition of P-Sic layers on WC-Co hard metal substrates. Experiments demonstrated that P-Sic coatings can be easily deposited on inductively heated substrates at temperatures between 1000-1400°C by thermal decomposition of 1,2-dimethyldisilane under normal pressure conditions. It was shown that this silicon compound is an advanced precurs...
متن کاملDEVELOPMENT OF CVD MULLITE COATINGS FOR SiC FIBERS
1.0 Introduction 2.0 Experimental details 2.1 CVD process 2.2 Oxidation Testing 2.3 Cyclic Oxidation Testing 2.4 Corrosion Testing 2.5 Tensile Testing 3.0 Results and discussion 3.1 3.2 3.3 3.4 3.5 3.6 Effect of system parameters 3.1.1 System pressure 3.1.2 Input gas velocity 3.1.3 A1/Si molar ratio Structure of mullite coating Oxidation Testing Cyclic Oxidation Hot Corrosion Tensile Strength 4...
متن کاملNucleation mechanisms in chemically vapor-deposited mullite coatings on SiC
Dense, uniform, and adherent chemically vapor-deposited mullite coatings were deposited on SiC substrates using the AlCl3–SiCl4–H2–CO2 system. Typical coating morphology consisted of a thin interfacial layer of g–Al2O3 nanocrystallites embedded within a vitreous SiO2-based matrix. When a critical Al/Si ratio of 3.2 ± 0.29 was reached within this nanocrystalline layer, mullite crystals nucleated...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research Express
سال: 2021
ISSN: 2053-1591
DOI: 10.1088/2053-1591/ac021e