Surface Tension of Liquid Fe-Ti and Fe-C-Ti Systems under H<SUB>2</SUB> Atmosphere
نویسندگان
چکیده
منابع مشابه
Production of Fe-TiN and Fe-Ti(N,C) composite powders by mechanical alloying
In this research, the production of Fe-TiN and Fe-Ti(N,C) composite powders by mechanical alloying was investigated and evaluated. Ferrotitanium (containing 70%Ti), titanium and graphite were used as the raw materials. Initial mixtures were milled in different time durations under the pure nitrogen atmosphere with the pressure of 5atm. The results showed that when N2 pressure is 5 at...
متن کاملSynthesis of Fe/Ti Oxides from a Single Source Alkoxide Precursor under Inert Atmosphere
O alcóxido heterometálico [FeCl{Ti 2 (OPr) 9 }] (1) foi utilizado como um precursor de fonte única para a preparação de óxidos de Fe/Ti sob atmosfera inerte. Três procedimentos sintéticos distintos foram adotados no processamento de 1, com o emprego de soluções aquosas ácidas (HNO 3 ou HCl), ou na ausência de ácido mineral. Os produtos foram caracterizados por difratometria de raios X (pó), mic...
متن کاملAssessment of the Al–Fe–Ti system
The Al–Fe–Ti system has been assessed and the limiting binary systems are shortly reviewed. Based on a thorough review of the literature, isotherms at 800, 900, and 1000 °C have been re-evaluated and a provisional isotherm at 1200 °C is presented for the first time. The effect of alloying the binary phases with the third component is reviewed with regard to the ternary homogeneity ranges, cryst...
متن کاملPhase equilibria and phase transformations in the Ti-rich corner of the Fe–Ni–Ti system
While the main features of the Fe–Ni–Ti system are well known at low Ti content, literature review of the Ti-rich corner revealed inconsistencies between experimental reports. This investigation presents new experimental results, defined to remove the uncertainties concerning melting behavior and solid-state phase equilibria of the (Ni,Fe)Ti2 phase with the adjacent (Fe,Ni)Ti (B2, CsCl-type str...
متن کاملMechanism of Bainite Transformation in Fe-Cr-Mo-V-Ti-C Steel
The kinetics and mechanism of bainite transformation have been studied in Fe-Cr-Mo-V-Ti-C steel high speed dilatometry backed by thermodynamic analysis. The complete transformation of austenite, however, has not occurred at any reported temperature. Obtained results confirm the incomplete reaction phenomenon with the cessation of the bainite transformation well before the paraequilibrium is ach...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1984
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.48.4_413