Surface Structure and Properties of Hydroxyapatite Coatings on NiTi Substrates
نویسندگان
چکیده
Hydroxyapatite coatings were deposited for 1, 2, and 3 h on NiTi substrates using plasma-assisted radio frequency sputtering. The matrix consisted of B2 B19’ phases Ti2Ni, Ni3Ti, Ni4Ti3 intermetallic compounds. surface coating was monoclinic hydroxyapatite. Increasing the deposition time to made it possible form a dense hydroxyapatite layer without visible defects. phase contrast maps showed that round grains different fractions, with smallest in sample h. wettability tests had highest energy, reflected proliferation density MCF-7 cell line.
منابع مشابه
Electrochemical preparation of chitosan/hydroxyapatite composite coatings on titanium substrates.
Composite coatings containing brushite (CaHPO(4). 2H(2)O) and chitosan were prepared by electrochemical deposition. The brushite/chitosan composites were converted to hydroxyapatite/chitosan composites in aqueous solutions of sodium hydroxide. The coatings ranged from approximately 1 to 15% chitosan by weight. Qualitative assessment of the coatings showed adhesion significantly improved over th...
متن کاملDeposition of Nano-Crystalline Fluor-hydroxyapatite Coatings on Titanium Substrates via Sol-Gel Method
In this investigation, fluor-hydroxyapatite (FHA) film was deposited on a titanium substrate by sol-gel method. Triethyl phosphite, ammonium fluoride and calcium nitrate in ethanol solutions were used respectively as P, F and Ca precursors. Typical apatite structures were obtained for all coatings after dipping and subsequent heat treatment at 550, 700 and 800 ºC, the coating layers were ...
متن کاملEffect of collagen on the mechanical properties of hydroxyapatite coatings.
In this study, the mechanical properties of bioactive coatings on Ti6Al4V substrates were investigated using instrumented nanoindentation. The aim was to observe the differences in the mechanical properties before and after immersion in collagen solution. The hydroxyapatite coatings were prepared through two processes: self-assembly in simulated body fluid and a hydrothermal method. Sintered hy...
متن کاملCorrosion behavior of polypyrrole/hydroxyapatite nanocomposite thin films electropolymerized on NiTi substrates in simulated body fluid
Hydroxyapatite (HAp) nanoparticles synthesized via microwave irradiation. Polypyrrole (PPy)/HAp nanocomposite was obtained using electropolymerization on nitinol (Ni) titanium (Ti) substrates. Fourier transform infrared was employed to characterize the nanocomposite formation. Electrochemical properties of the nanocomposite were investigated using polarization and electrochemical impedance spec...
متن کاملPreparation and Characterization of Lanthanum-Incorporated Hydroxyapatite Coatings on Titanium Substrates
Titanium (Ti) has been widely used in clinical applications for its excellent biocompatibility and mechanical properties. However, the bioinertness of the surface of Ti has motivated researchers to improve the physicochemical and biological properties of the implants through various surface modifications, such as coatings. For this purpose, we prepared a novel bioactive material, a lanthanum-in...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Coatings
سال: 2023
ISSN: ['2079-6412']
DOI: https://doi.org/10.3390/coatings13040722