Surface Segregation and Surface Defect Formation During Aluminum Billet Casting
نویسندگان
چکیده
منابع مشابه
simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Effect of casting speed on solidification structure and central macrosegregation during continuous casting of high-carbon rectangular billet
IntroductIon Solidification structure and macrosegregation have great influence on the quality of high carbon steels. Center segregation in high carbon steel results in a high concentrations of chemical components especially carbon element and has a great influence on the quality of wire rod [1-3]. Wire rod with center cementite network resulting from severe segregation not only shows low ducti...
متن کاملAluminum and Aluminum Alloys Casting Problems
Aluminum castings have played an integral role in the growth of the aluminum industry since its inception in the late 19th century. The first commercial aluminum products were castings, such as cooking utensils and decorative parts, which exploited the novelty and utility of the new metal. Those early applications rapidly expanded to address the requirements of a wide range of engineering speci...
متن کاملSurface proximity and boron concentration effects on end-of-range defect formation during nonmelt laser annealing
formation during nonmelt laser annealing J. A. Sharp, A. J. Smith, R. P. Webb, K. J. Kirkby, N. E. B. Cowern, D. Giubertoni, S. Gennaro, M. Bersani, M. A. Foad, P. F. Fazzini, and F. Cristiano Surrey Ion Beam Centre, Advanced Technology Institute, Faculty of Engineering and Physical Sciences, University of Surrey, Guildford GU2 7XH, United Kingdom School of Electrical, Electronic and Computer E...
متن کاملSurface Modifications during a Catalytic Reaction: a Combined APT and FIB/SEM Analysis of Surface Segregation
To improve the understanding of catalytic processes, the surface structure and composition of the active materials need to be determined before and after reaction. Morphological changes may occur under reaction conditions and can dramatically influence the reactivity and/or selectivity of a catalyst. Goldbased catalysts with different architectures are currently being developed for selective ox...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Indian Institute of Metals
سال: 2015
ISSN: 0972-2815,0975-1645
DOI: 10.1007/s12666-015-0647-0