Surface Roughness Values of Magnesium Alloy AZ31 When Turning by Using Rotary Cutting Tool
نویسندگان
چکیده
منابع مشابه
Anodizing of Magnesium Alloy Az31 by Alkaline Solution
-Anodizing of AZ 31 Mg alloy was investigate in 3M KOH solution for 10, 20 and 30min. at constant voltage of 5V. Atomic force microscope (AFM) used to investigate the roughness of anodic film formed on the surface while the scanning electron microscope (SEM) was used to determine the morphology of the anodic film, it was found that the roughness of the anodic film is mainly depend on the anodiz...
متن کاملEvaluation of Flank Wear of Iron-rich Binder Carbide Cutting Tool in Turning of Titanium Alloy
Despite the fact that Titanium material has been considered as difficult to cut material, its usage has been increasing day by day in all engineering sectors; wherever criticality is encountered. Many studies are going on in view of increasing tool life at high cutting speed to improve productivity. In this study, attempt has been made to see the effect of iron as a partial substitution along ...
متن کاملOptimization of Cutting Parameters for Surface Roughness in Turning
The optimized cutting parameters are very important to control the required surface quality. In the present study, Taguchi method is used to find the optimal cutting parameters for surface roughness (Ra) in turning. The L-18 orthogonal array, the signal-to-noise ratio & analysis of variance are employed to study the performance characteristics in turning operations of AISI-410 steel bars using ...
متن کاملSurface Roughness Modeling in Precision Turning of Aluminium by Polycrystalline Diamond Tool Using Response Surface Methodology
Diamond, because of its high modulus of elasticity, chemical inertness and exceptionally high hardness, is ideal for obtaining fine surface finish and accuracy. Today’s requirement of high precision parts like magnetic memory device, laser equipment, electrostatic copier, printing machine, etc., made of non-ferrous materials, such as aluminum, copper and resin demands very high surface finish. ...
متن کاملExperimental Study on the Cutting Surface Roughness in Cnc Turning Operations by Using Taguchi Technique
Surface roughness is used to determine and evaluate the quality of a final product in turned parts. In order to get better surface finish, the proper setting of cutting parameters is crucial before the process takes place. Titanium Grade 5 material is one whose surface hardness is high and it is used for making Aerospace engine components, titanium rod and ideal materials for medical implements...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: INSIST
سال: 2016
ISSN: 2502-8588
DOI: 10.23960/ins.v1i1.20