Surface Roughness Research of Piezoelectric Self-adaptive Micro-EDM
نویسندگان
چکیده
منابع مشابه
A Review of Micro - EDM
There is a huge demand in the production of microstructures by a non-traditional method which is known as Micro-EDM. Micro-EDM process is based on the thermoelectric energy between the workpiece and an electrode. Micro-EDM is a newly developed method to produce micro-parts which in the range of 50 μm -100 μm. Micro-EDM is an efficient machining process for the fabrication of a micro-metal hole ...
متن کاملAnalysis of Surface Roughness and Micro-hardness in Roller Burnishing of Aluminum Alloy 6061
Burnishing is a chip-less finishing process, in which a hard roller or ball presses the surface layer of part to perform plastic deformation in the surface layer and produce improved finish, enhanced hardness and compressive residual stresses on the surface of special materials such as Aluminum and Brass. In the following research, the effect of input parameters such as feed rate, cutting speed...
متن کاملAn Experimental Study of Surface Roughness of H11 Steel in Edm Process Using Copper Tool Electrode
In this study, the effect of input parameters of Electro Discharge Machining (EDM) process including polarity, peak current, pulse on time, duty cycle, gap voltage and concentration of abrasives powder in dielectric fluid on surface roughness are experimentally investigated. A L18 Taguchi’s standard orthogonal array is used for experimental design. Copper is used as tool electrode to machine H1...
متن کاملAdaptive Control of Machining Process Using Electrical Discharging Method (EDM) Based on Self-Tuning Regulator (STR)
In order to improve the optimal performance of a machining process, a booster to improve the serve control system performance with high stability for EDM is needed. According to precise movement of machining process using electrical discharge (EMD), adaptive control is proposed as a major option for accuracy and performance improvement. This article is done to design adaptive controller based o...
متن کاملParametric Study of Powder Mixed EDM and Optimization of MRR & Surface Roughness
Electrical discharge machining (EDM) is a wellestablished non-conventional machining process, used for manufacturing geometrically complex or hard and electrically conductive material parts that are extremely difficult to cut by other conventional machining processes. But sometimes poor surface finish and low volumetric material removal rate limits its use in the industry. To diffuse this probl...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia CIRP
سال: 2016
ISSN: 2212-8271
DOI: 10.1016/j.procir.2016.02.252