SURFACE ROUGHNESS PARAMETERS MODEL FOR MACHINING GFRP COMPOSITES BY CEMENTED CARBIDE TOOLS
نویسندگان
چکیده
منابع مشابه
Machinability of glass fiber reinforced plastic (GFRP) composite materials
This paper deals with the study of machinability of GFRP composite tubes of different fiber orientation angle vary from 30 to 90. Machining studies were carried out on an all geared lathe using three different cutting tools: namely Carbide (K-20), Cubic Boron Nitride (CBN) and Poly-Crystalline Diamond (PCD). Experiments were conducted based on the established Taguchi’s Design of Experiments (DO...
متن کاملSurface Roughness, Machining Force and FlankWear in Turning of Hardened AISI 4340 Steel with Coated Carbide Insert: Cutting Parameters Effects
The current experimental study is to investigate the effects of process parameters (cutting speed, feed rate and depth of cut) on performance characteristics (surface roughness, machining force and flank wear) in hard turning of AISI 4340 steel with multilayer CVD (TiN/TiCN/Al2O3) coated carbide insert. Combined effects of cutting parameter (v, f, d) on performance outputs (Ra, Fm and VB) ar...
متن کاملpredictive modeling of surface roughness and material removal rate in turning of ud-gfrp composites using carbide (k10) tool
this work presents an experimental investigation of the influence of the six important machining parameters (tool nose radius, tool rake angle, feed rate, cutting speed, cutting environment (dry, wet and cooled) and depth of cut) on surface roughness & material removal rate in the machining unidirectional glass fiber reinforced plastics (ud-gfrp) composite using carbide (k10) cutting tool durin...
متن کاملInfluence of machining parameters on surface roughness and dry friction
Article history: Received 6 October, 2015 Accepted 7 March 2016 Available online 8 March 2016 Dry friction depends on the surface topography which, in turn, is governed by machining parameters in addition to several other factors,. Therefore, in order to establish a qualitative relationship among these factors, the surface roughness and coefficient of static friction are measured for specimens ...
متن کاملinvestigation of machining parameters in wire electrical discharge machining (wedm) on the surface roughness & cutting speed of tungsten carbide
surface roughness is one of the most important parameters that plays very critical role in determining the quality of engineering components. a good surface quality resulting in improve of fatigue strength, corrosion and wear resistance of the workpiece. on the other hand, increasing cutting speed and decreasing time of machining are desirable for manufacturers in order to reduce costs and incr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal on Design and Manufacturing Technologies
سال: 2008
ISSN: 0973-9106
DOI: 10.18000/ijodam.70026