Surface roughness of PLA parts by FDM with chemical treatment
نویسندگان
چکیده
Abstract Chemical treatment can effectively reduce the surface roughness of fused deposition modeling (FDM) parts. An effort is made in this study to appraise finish poly lactic acid (PLA) parts by FDM with hot vapor smoothing treatment. The tests were designed as per Taguchi L16 orthogonal array based factorial design experimentation while varying process parameters such time, temperature and solution concentration smoothing. PLA after chemical reduces different degrees compared prototypes. results statistical indicate that affected temperature. optimum have been verified performing experiments may provide a theoretical basis for practical application.
منابع مشابه
Influence of microwave treatment on surface roughness, hydrophobicity, and chemical composition of galena
The influence of microwave treatment on the surface roughness, hydrophobicity, and chemical composition of galena was studied. The pure galena specimens and purified galena concentrate were used in this work. A conventional multi-modal oven (with a frequency of 2.45 GHz and a maximum power of 900 W) was used to conduct the experiments. The results obtained from the atomic-force microscopy analy...
متن کاملMetallization on FDM Parts Using the Chemical Deposition Technique
Metallization of ABS (acrylonitrile-butadiene-styrene) parts has been studied on flat part surfaces. These parts are fabricated on an FDM (fused deposition modeling machine) using the layer-wise deposition principle using ABS as a part material. Electroless copper deposition on ABS parts was performed using two different surface preparation processes, namely ABS parts prepared using chromic aci...
متن کاملMechanical and Thermal Properties of Fdm Parts Manufactured with Polyamide
Fused Deposition Modeling (FDM) is an Additive Manufacturing (AM) technology which is used for prototypes, single-part production and also small batch productions. For use as a final product, it is important that the parts have good mechanical properties, high dimensional accuracy and smooth surfaces. The knowledge of the mechanical properties is very important for the design engineer when it c...
متن کاملReduction of Surface Roughness by Means of Laser Processing over Additive Manufacturing Metal Parts
Optimization of processing parameters and exposure strategies is usually performed in additive manufacturing to set up the process; nevertheless, standards for roughness may not be evenly matched on a single complex part, since surface features depend on the building direction of the part. This paper aims to evaluate post processing treating via laser surface modification by means of scanning o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of physics
سال: 2021
ISSN: ['0022-3700', '1747-3721', '0368-3508', '1747-3713']
DOI: https://doi.org/10.1088/1742-6596/1948/1/012199