Surface roughness crushing effect on shear behavior using PFC
نویسندگان
چکیده
منابع مشابه
Effect of surface roughness on steel-steel dry friction coefficient
The influence of surface roughness magnitude and direction on dry static friction coefficient between two similar steel samples has been studied through an experiment. A testing apparatus has been designed and fabricated to measure the friction coefficient for a few forms of surface asperity. According to the results of the experiments, dry friction coefficient is affected by both magnitude and...
متن کاملTHE EFFECT OF OPACIFIERS ON SURFACE ROUGHNESS OFCERAMIC GLAZES
Surface smoothness of ceramic glazes is always an important characteristic of ceramic glazes as a point of surface engineering studies. Surface roughness affects chemical resistivity, glossiness and stainabiliy of glazes. In fact, less surface roughness improves cleanability of the surface by the least usage amount of detergents. In this investigation, surface topography of two common opaque gl...
متن کاملEffect of surface roughness on amalgam repair using adhesive systems.
The objective of this in vitro study was to evaluate the effect of three surface treatments and two adhesive systems on the shear bond strength of old and freshly placed amalgam. The results suggested that the intact amalgam showed a significantly higher strength than repaired groups and the strongest repaired specimens were made when the amalgam surfaces were roughened with a diamond bur or mi...
متن کاملModeling the combined effect of surface roughness and shear rate on slip flow of simple fluids.
Molecular dynamics (MD) and continuum simulations are carried out to investigate the influence of shear rate and surface roughness on slip flow of a Newtonian fluid. For weak wall-fluid interaction energy, the nonlinear shear-rate dependence of the intrinsic slip length in the flow over an atomically flat surface is computed by MD simulations. We describe laminar flow away from a curved boundar...
متن کاملSurface roughness effect on copper-alumina adhesion
The surface roughness of the substrate itself could play an important role for the bonding at the interface. In this paper, a correlation of the surface roughness of a rigid alumina substrate and its 2D model of estimated surface area has been studied using Atomic Force Microscopy (AFM). With rougher surface, the adhesive strength between a deposited copper film and the alumina substrate is hig...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Korean Tunnelling and Underground Space Association
سال: 2012
ISSN: 2233-8292
DOI: 10.9711/ktaj.2012.14.4.321