SURFACE PROPERTIES OF TITANIUM ALLOY VT 6 AFTER PLASMA ELECTROLYTIC TREATMENT
نویسندگان
چکیده
منابع مشابه
Comparative Sem and Edx Analysis of Surface Coatings Created on Niobium and Titanium Alloys after Plasma Electrolytic Oxidation (peo)
Original scientific paper In the paper, the SEM and EDS study results of the surface coatings formed on the niobium and titanium alloys (TNZ, NiTi, Ti6Al4V) after the Plasma Electrolytic Oxidation (PEO), also known as Micro Arc Oxidation (MAO), are described. For the experiment of the PEO treatment, a non-conventional electrolyte, based on the concentrated orthophosphoric acid, was used. Copper...
متن کاملIn Vitro Biocompatibility Evaluation of Surface-modified Titanium Alloy
INTRODUCTION Ventricular Assist Devices (VADs) have become a means to both preserve and prolong the lives of patients with heart failure. By providing circulatory support, VADs lessen the load of the heart. Compared to traditional medical management of heart failure, VADs have a higher patient survival rate [1]. VADs are used as both a bridge to transport as well as form of destination therapy ...
متن کاملSurface Modification of Titanium by Plasma Nitriding
A systematic investigation was undertaken on commercially pure titanium submitted to plasma nitriding. Thirteen different sets of operational parameters (nitriding time, sample temperature and plasma atmosphere) were used. Surface analyses were performed using X-ray diffraction, nuclear reaction and scanning electron microscopy. Wear tests were done with stainless steel Gracey scaler, sonic app...
متن کامل[Development and evaluation of a new surface treatment method for titanium alloy implants].
We developed and evaluated a new method of titanium surface treatment for direct bone fixation of implants. This method consists of hydroxyapatite (HA) flame coating onto a porous titanium surface which is arc-sprayed with pure titanium material in argon gas at atmospheric pressure. The surface roughness of the porous layer was 360 μm, Rmax, and showed higher resistance to blast erosion in comp...
متن کاملMechanical Properties and Corrosion Behavior of a Beta Titanium Alloy
Recently, people devote to the development of beta titanium alloys which have better biocompatibility because of the addition of Mo, Nb, Ta, Zr, Sn, et al. In this paper, the effects of heat treatment and cold roll deformation on the mechanical properties of the Ti-11.3Mo-6.6Zr-4.3Sn alloy (TMZS) are investigated by tensile test. The results show that the excellent combination of strength and d...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENIY KHIMIYA KHIMICHESKAYA TEKHNOLOGIYA
سال: 2018
ISSN: 2500-3070,0579-2991
DOI: 10.6060/tcct.20186103.5705