Surface Pretreatment and Fabrication Technology of Braided Carbon Fiber Rope Aluminum Matrix Composite
نویسندگان
چکیده
منابع مشابه
Studies on Automatic Measurement Technology for Surface Braided Angle of Three-Dimensional Braided Composite Material Performs
This paper describes a new measuring algorithm for three-dimensional (3-D) braided composite material .Braided angle is an important parameter of braided composites. The objective of this paper is to present an automatic measuring system. In the paper, the algorithm is performed by using vc++6.0 language on PC. An advanced filtered algorithm for image of 3-D braided composites material performs...
متن کاملPREDICTING THE STIFFNESS OF BIAXIAL BRAIDED FIBER COMPOSITES BY INCORPORATION OF CARBON NANO FIBER
In this study, carbon nano fibers (CNFs) were mixed into epoxy resin through a magnetic stirrer and again mixed using ultra sonicator. Using hand layup technique, biaxial braided fiber composites were prepared with unfilled, 0.2, 0.5 and 1 wt% CNF. Tensile test and shear test was performed to identify the tensile strength and shear strength of the composites. Fractured surface of the tensile sp...
متن کاملInfluence of Fiber Surface Structure on Interfacial Structure between Fiber and Matrix in Vapor Grown Carbon Fiber Reinforced Aluminum Matrix Composites
Vapor grown carbon fiber reinforced pure aluminum matrix composites were fabricated by the hot-pressing method below the melting temperature of pure aluminum. The surface structures of the vapor grown carbon fibers and the interfacial structures between the fibers and the matrix in the composite were observed. The precipitation mechanism of crystalline aluminum carbide was also investigated. An...
متن کاملNegative piezoresistivity in continuous carbon fiber epoxy-matrix composite
The negative and positive piezoresistivity in continuous carbon fiber epoxy-matrix composite has been clarified. The negative piezoresistivity associated with the increase of the through-thickness resistivity upon longitudinal tension and decrease in the throughthickness resistivity upon longitudinal compression is practically attractive for strain sensing and is attributed to the decrease in t...
متن کاملLow Cost Carbon Fiber Technology Development for Carbon Fiber Composite Applications
Maximum 200 words) The main goals of this research program at UTSI were: 1) to produce low cost carbon fibers and 2) to develop specific carbonbased material technologies to meet current and future high performance fiber-reinforced composite needs of FTA and other organizations. UTSI has been carrying out the relevant research programs since it received the carbon fiber spinning technologies an...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metals
سال: 2020
ISSN: 2075-4701
DOI: 10.3390/met10091212