Surface Observation of Pulsed Electric Current Sintered Alumina Balls.
نویسندگان
چکیده
منابع مشابه
Microstructure and mechanical properties of pressureless sintered alumina-silver composites
The silver toughened alumina ceramics, which were fabricated via a conventional ceramic processing route using commercially available alumina and silver oxide powders as the starting materials, exhibit a higher fracture toughness (6 to 9 MPamo.5) than the monolithic alumina ceramic ( 2.5 to 3.0 MPamo.5). The weak interfacial bonding between the silver inclusions and the alumina matrix is charac...
متن کاملPulsed laser determination of surface electric charge distributions
2014 We propose a new method for high resolution determination of surface electric charge distributions on a dielectric plate. The method is based on the measurement of the variation of the charges induced on a probe when the charges to be measured are being displaced. This local perturbatidn is achieved by means of a laser pulse focused on a thin absorbing target adjacent to the dielectric. By...
متن کاملElectric field in SPS: geometry and pulsed current effects
Electrical heating of the graphite die and punch assembly is a unique feature of the spark plasma sintering (SPS) process. The high currents needed to heat the die, despite its low resistance, can produce an electric field across the ceramic specimens that may be enough to induce field assisted sintering. Despite the large number of publications of SPS, the electric field intensity has not been...
متن کاملResearch on Defects Inspection of Solder Balls Based on Eddy Current Pulsed Thermography
In order to solve tiny defect detection for solder balls in high-density flip-chip, this paper proposed feasibility study on the effect of detectability as well as classification based on eddy current pulsed thermography (ECPT). Specifically, numerical analysis of 3D finite element inductive heat model is generated to investigate disturbance on the temperature field for different kind of defect...
متن کاملCryosurgery with Pulsed Electric Fields
This study explores the hypothesis that combining the minimally invasive surgical techniques of cryosurgery and pulsed electric fields will eliminate some of the major disadvantages of these techniques while retaining their advantages. Cryosurgery, tissue ablation by freezing, is a well-established minimally invasive surgical technique. One disadvantage of cryosurgery concerns the mechanism of ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 1999
ISSN: 0914-5400,1882-1022
DOI: 10.2109/jcersj.107.187