Surface nanocrystallization of wood particles from biomass waste for regenerated isotropic wood with excellent properties
نویسندگان
چکیده
منابع مشابه
Physical and Mechanical Properties of Bio-Composites from Wood Particles and Liquefied Wood Resin
Compression molded composites were made from wood particles and a liquefied wood/phenol/formaldehyde co-condensed resin. Based on our previous research, a phenol to wood (P1W) ratio of 2/1 was chosen for this study. The two experimental variables selected were: 1) liquefaction temperature (1500 and 180°C) and 2) cooking method (atmospheric and sealed). Panels were tested in static bending for m...
متن کاملEnzymatic hydrolysis of biomass from wood
Current research and development in cellulosic ethanol production has been focused mainly on agricultural residues and dedicated energy crops such as corn stover and switchgrass; however, woody biomass remains a very important feedstock for ethanol production. The precise composition of hemicellulose in the wood is strongly dependent on the plant species, therefore different types of enzymes ar...
متن کاملProperties of Wood and Structural Wood Products
Wood differs from other construction materials because it is produced in a living tree. As a result, wood possesses material properties that may be significantly different from other materials normally encountered in structural design. Although it is not necessary to have an in-depth knowl edge of wood anatomy and properties, it is necessary for the engineer to have a general understanding of ...
متن کاملWaste-Wood-Derived Fillers for Plastics
Filled thermoplastic composites are stiffer, stronger, and more dimensionally stable than their unfilled counterparts. Such thermoplastics are usually provided to the end-user as a precompounded, pelletized feedstock. Typical reinforcing fillers are inorganic materials like talc or fiberglass, but materials derived from waste wood, such as wood flour and recycled paper fiber, are also effective...
متن کاملProcess Modifications for Wood Waste Feedstocks
Issue: Pulp and paper industry were originally designed and constructed to use virgin wood feedstocks as a raw material. Some of the virgin wood fiber used for the pulp and paper industry is from lower value roundwood logs that are chipped for pulping. The other major source is from the residuals from sawmill, veneer, and lumber plants. These solid wood production plants produce millions of ton...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: National Science Review
سال: 2021
ISSN: 2095-5138,2053-714X
DOI: 10.1093/nsr/nwab096