Surface Modification with Pressure Pulse Plasmas
نویسندگان
چکیده
منابع مشابه
Surface modification of titanium with hydrothermal treatment at high pressure.
Surface modification of titanium was investigated by means of hydrothermal treatment with a maximum pressure of 6.3 MPa (280 degrees C temperature) in CaO solution or water to improve bioactivity and biocompatibility. As a result, calcium titanate was formed on the titanium surface. Moreover, titanium oxide and titanium hydroxide layers on the surface increased as temperature and pressure incre...
متن کاملSurface Modification of TIMETAL 834 by Excimer Pulse Laser
Ti alloys become very popular in various engineering fields due to its light weight, high strength and good corrosion resistance properties. Nevertheless, its application is limited in many areas like: tribology, high temperature oxidation and aggressive corrosion fields due to its poor surface properties. Therefore, the proper surface treatment is required to increase the usageof Ti alloys in ...
متن کاملShort-pulse laser-produced plasmas
In this review, the physics of short-pulse laser-produced plasmas at moderate intensities is described, together with applications to x-ray sources and material processing.
متن کاملModification of Glass Surface by Atmospheric Pressure Plasma
A Diffuse Coplanar Surface Barrier Discharge (DCSBS) operating in air at atmospheric pressure has been used to induce changes in the surface properties of glass. The contact angles of water drop on the surface of glass, which were measured by drop shape analysis, decreased markably with plasma treatment for 1 s. With the increasing of the plasma treatment time, the contact angles of the samples...
متن کاملPulse-Discharge Plasmas for Plasma-Accelerator Applications
For particle-beam-driven plasma wakefield accelerators, a long and fully-ionized plasma is desirable. We describe an experiment at UCLA to develop a prototype of such plasma using a pulsed-current discharge. Scaling of the plasma density with glass-tube diameter and with discharge-circuit parameters is currently underway. We have found that 4 Torr of Argon can be fully ionized to a density of a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Plasma Processes and Polymers
سال: 2009
ISSN: 1612-8850
DOI: 10.1002/ppap.200930010