Surface modification of polysulfone membranes applied for a membrane reactor with immobilized alcohol dehydrogenase
نویسندگان
چکیده
منابع مشابه
Polysulfone/ Carbon Nanotubes Asymmetric Nanocomposite Membranes: Effect of Nanotubes Surface Modification on Morphology and Water Permeability
Polysulfone/carbon nanotubes (PSF/CNTs) nanocomposite membrane was prepared via phase inversion induced by immersion precipitation technique. In addition, the surface of the CNTs were functionalized by polar carboxylic and amine groups to improve the interaction between the CNTs and the polymer matrix. For this purpose, the neat CNTs were chemically treated using sulfuric acid/ nitric acid (H2S...
متن کاملA Plasma Reactor for Solid Surface Modification
A general purpose plasma reactor has been designed and built to be used in various fields such as metallurgy, and microelectronics. The important aspects of the system design are : (a) the chamber can be evacuated to a base pressure of approximately 5 X 10-7 Tom; (b) capabilities for thermal bake out at 150°C, and nitrogen pre-burn at a pressure of about 3 X 10-3 Torr; (c) substrate holder whic...
متن کاملAdvances in Polysulfone-Based Membranes for Hemodialysis
The polysulfone-based membrane has been used in hemodialysis (HD) and it is continuously developed to maintain its sustainability on the subject of biocompatibility. During the polysulfone-based membrane development, several parameters should be considered to improve the membrane performances, such as excellent biocompatibility, appropriate ultrafiltration rate, and effective clearance of the t...
متن کاملA carbon nanotube-infused polysulfone membrane with polyvinyl alcohol layer for treating oil-containing waste water
A carbon nanotube (CNT) integrated polymer composite membrane with a polyvinyl alcohol barrier layer has been prepared to separate oil from water for treatment of oil-containing waste water. The CNTs were synthesised using chemical vapour deposition, and a phase inversion method was employed for the blending of the CNTs in the polymer composite solution for casting of the membrane. Relative to ...
متن کاملModification of polysulfone membranes with polyethylene glycol and lignosulfate: electrical characterization by impedance spectroscopy measurements.
Two sets of composite membranes having an asymmetric sulfonated polysulfone membrane as support layer have been obtained and electrically characterized (membranes SPS-PEG and PA-LIGS). The skin layer of the membrane SPS-PEG contains different percentages of polyethylene glycol in the casting solution (5, 25, 40, and 60 wt%), while lignosulfonate was used for manufacturing PA-LIGS membranes (5, ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Today Communications
سال: 2018
ISSN: 2352-4928
DOI: 10.1016/j.mtcomm.2017.12.019