Surface Modification of Polyamide Ultrafiltration Membrane by Plasma Polymerisation of Acrylic Acid
نویسندگان
چکیده
منابع مشابه
A novel method of surface modification to polysulfone ultrafiltration membrane by preadsorption of citric acid or sodium bisulfite
In membrane processes, various agents are used to enhance, protect, and recover membrane performance. Applying these agents in membrane modification could potentially be considered as a simple method to improve membrane performance without additional process. Citric acid (CI) and sodium bisulfite (SB) are two chemicals that are widely used in membrane feed water pretreatment and cleaning proces...
متن کاملUltrafiltration of plasma uric acid.
In view of the possibility that the uric acid of the blood might be partly "bound" to protein and partly "free" (Benedict and Behre, 1931) and that this might provide some explanation for the phases of gout, it was decided to investigate various methods of ultrafiltration of the plasma uric acid in gouty and normal individuals. Lambie (1940) reported a case of leukaemia with subsequent developm...
متن کاملTime-related surface modification of denture base acrylic resin treated by atmospheric pressure cold plasma.
The changes of denture base acrylic resin surface properties under cold plasma and the relationships with time were investigated. Cold plasma treated the specimens for 30 s, 60 s, 90 s, and 120 s, respectively. Water contact angles were measured immediately after the treatment, 48 h, 15 days and 30 days later. Surface roughness was measured with 3-D laser scanning microscope. Candida albicans a...
متن کاملSurface Modification of PET Fabric by Graft Copolymerization with Acrylic Acid and Its Antibacterial Properties
Graft copolymerization of acrylic acid (AA) onto Poly(ethylene terephthalate) (PET) fabrics with the aid of benzoyl peroxide was carried out. The effect of polymerization parameters on the graft yield was studied. Percent grafting was enhanced significantly by increasing benzoyl peroxide (BP) concentrations up to 3.84 g/lit and then decreased upon further increase in initiator concentration. Pr...
متن کاملSurface Modification of Silicone Rubber Membrane by Microwave Discharge to Improve Biocompatibility
Wetability of biocompatible polymers can be improved by plasma surface modification. The purpose of this study was to surface modify an experimental poly (dimethylsiloxane) rubber (PDMS) material in order to improve its wetability and biocompatibility. Surface properties of the PDMS were characterized using contact angles measurement for wetability analysis. Samples of experimental silico...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sains Malaysiana
سال: 2020
ISSN: 0126-6039
DOI: 10.17576/jsm-2020-4912-22