Surface Modification by Stearic Acid on Property of PLZT Piezoelectric Ceramics Prepared via Powder Injection Molding
نویسندگان
چکیده
منابع مشابه
On the Study of Mechanical Properties of Aluminum/Nano-Alumina Composites Produced via Powder Injection Molding
Powder Injection Molding (PIM) is a precision manufacturing process used for production of advanced composites. Mixing of polymeric binder with metal powders, molding of feedstock, de-binding of brown parts and sintering of green samples are four main steps of this process. In the present study, the compounds containing multi-component binder system and aluminum/ nano-alumina (0-9 wt.%) powders...
متن کاملFABRICATION OF PIEZOELECTRIC CERAMlClPOLYMER COMPOSITES BY INJECTION MOLDING
Research at the Materials Research Laboratory, Pennsylvania State University has demonstrated the potential for improving hydrophone performance using piezoelectric ceramic/polymer composites. As part of an ONR-funded initiative to develop cost-effective manufacturing technology for these composites, Materials Systems is pursuing an injection molding ceramic fabrication approach. This paper bri...
متن کاملProgress in Titanium Metal Powder Injection Molding
Metal powder injection molding is a shaping technology that has achieved solid scientific underpinnings. It is from this science base that recent progress has occurred in titanium powder injection molding. Much of the progress awaited development of the required particles with specific characteristics of particle size, particle shape, and purity. The production of titanium components by injecti...
متن کاملSimulation and modeling of macro and micro components produced by powder injection molding: A review
During the recent years powder processing technologies have gained much attention due to the less energy consumption and recyclable powders. Manufacturing of complicated parts by the conventional powder metallurgy (PM) method is hard due to the uniaxial pressure, which leads to the low design flexibility. In order to prevail these constraints, powder injection molding (PIM) process, which inclu...
متن کاملStructural characterization of BaZrO3 nanopowders prepared by stearic acid gel method
Pure barium zirconate nanopowders were successfully prepared in wet-chemistry synthesismethod, using barium stearate and tetra-n-butyl zirconate as Ba, Zr sources and stearic acid ascomplexing reagent. The gel was calcined at 800 and 900 °C in air. Results of thermal analysisare given, including both DTG and TG. Fourier transform infrared spectrometry (FTIR), X-raydiffraction (XRD), transmissio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Inorganic Materials
سال: 2019
ISSN: 1000-324X
DOI: 10.15541/jim20180323