Surface Microstructure Control via Friction Stir Process
نویسندگان
چکیده
منابع مشابه
Optimization of Friction Stir Welding Tool Advance Speed via Monte-Carlo Simulation of the Friction Stir Welding Process
Recognition of the friction stir welding process is growing in the aeronautical and aero-space industries. To make the process more available to the structural fabrication industry (buildings and bridges), being able to model the process to determine the highest speed of advance possible that will not cause unwanted welding defects is desirable. A numerical solution to the transient two-dimensi...
متن کاملFriction Stir Welding Process Optimization: Experimental Methods
Introduction The Friction Stir Welding (FSW) process is an innovative technique to join metals in the plasticity field, thus not reaching the melting temperature and consequently the liquid state as it happen in traditional welding processes. This feature of the FSW proved an enhancement of the fatigue behaviour and strength of the joints, leading some companies to adopt the process for the man...
متن کاملEffects of Friction Stir Process Parameters on Microstructure and Mechanical properties of Aluminum Powder Metallurgy Parts
The effects of friction stir processing (FSP) on the microstructure and mechanical properties of aluminum powder metallurgy (PM) parts was investigated. PM parts were then subjected to FSP at advancing speeds (v) of 40-200 mm/min and tool rotational speeds (ω) of 800-1600 rpm. Microhardness (HV) and tensile tests at room temperature were used to evaluate the mechanical properties of the frictio...
متن کاملInfluence of Process Parameters on Microstructure of Friction Stir Processed Mg AZ31 Alloy
Friction stir processing (FSP) has been developed on the principles of friction stir welding (FSW) as an effective and efficien new method for grain refinement and microstructural modification, providing intense plastic deformation as well as higher strain rates than other conventional severe plastic deformation methods. FSP produces an equiaxed homogeneous microstructure consisting of fine gra...
متن کاملinvestigation of mechanical property and microstructure of nanocomposite az31/sic fabricated by friction stir process
the friction stir process (fsp) is a solid state process, which has been used to insert reinforcing particles into the structure of a material to create a composite with improved properties. magnesium is a light structural metal that is increasingly used in the aerospace and automobile industries. in this research, sic nanoparticles were added to az31 alloy using fsp in two overlaps of 100% and...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korean Welding and Joining Society
سال: 2007
ISSN: 1225-6153
DOI: 10.5781/kwjs.2007.25.3.006