Surface hardness increasing of iron alloys by nitrogen-deuterium ion implanting

Evaluation of Nitrogen Diffusion in Plasma Nitrided Iron by Various

   Diffusion of nitrogen in plasma nitrided iron and structural evolution during the nitriding process were evaluated by several characterization techniques including optical microscopy (OM), microhardness depth profiling (HDP), scanning electron microscopy (SEM), x-ray diffraction (XRD), glow discharge optical emission spectroscopy (GDOES), and secondary ion mass spectroscopy (SIMS). Plasma ni...

Spherical Indentation Hardness of Shape Memory Alloys

The Causes of Local Hardness Increasing in Powerplant Rotors and its Modification by Tempering (TECHNICAL NOTE)

Local hardness increasing on the surface of the power plant rotor may result in severe damages. One major solution for rapid repairing of the rotors is the adaptive tempering heat treatment. For this purpose, after identification of the damaged rotor, initial investigations and tests (such as visual inspection, chemical analysis, nondestructive hardness measurements and replica or on-site metal...

Surface hardness improvement in high efficiency deep grinding process by optimization of operating parameters

The grinding is one of the most important methods that directly affects tolerances in dimensions, quality and finished surface of products. One of the major problems in the material removal processes specially grinding is the heat generation during the process and the residual tensile stress in the surfaces of product. Therefore, optimization of High Efficiency Deep Grinding (HEDG) process is t...

Surface Hardness Measurment and Microstructural Characterisation of Steel by X-Ray Diffraction Profile Analysis

An X-ray diffraction line will broaden considerably when steels change into martensitic structure on quenching. The results presented in this paper show that X-ray diffraction technique can be employed for a rapid and nondestructive measurement of hardness of hardened steel. Measurement on various quenched and tempered steels showed that the breadth of its diffraction peak increased with increa...