Surface-hardened Layer Properties of Newly Developed Case-hardening Steel
نویسندگان
چکیده
منابع مشابه
Finite Element Analysis of Hardened Steel Cutting
Hard machining, as attractive replacement for many rough and finish grinding operation, generates high cutting forces and temperature that enhance tool wear when act together. Therefore, the tool geometry and machining parameters have to be carefully optimized for a given material. Because of high cost and time consuming experimental work up-to-date advanced software for modeling and simulation...
متن کاملCopper Precipitation Hardened, High Strength, Weldable Steel
Steel containing 0.03% carbon, 1.35% copper and 0.84% nickel had yield strength in the 540-625 MPa (78-90 Ksi) range depending on thickness, ultimate tensile strength in the 625-690 MPa (90100 Ksi) range, and 25-30% elongation when air cooled after hot rolling. No brittle heat-affected zone was formed during manual or automatic submerged arc welding without pre-heating or postheating. The fract...
متن کاملImprovement of Mechanical Properties and Work-Hardening Behavior of Intercritically Annealed Dual Phase Steel
The effect of the initial microstructure and intercritical annealing on mechanical properties and work-hardening response of a high-formability low carbon steel were studied. The work-hardening analysis was based on the modified Crussard–Jaoul method. The ferritic-pearlitic sheets showed low strength and high total elongation with the appearance of the yield point phenomenon. The occurrence of ...
متن کاملAn Evaluation of the Corrosion and Mechanical Performance of Interstitially Surface
A surface hardening technique called “interstitial hardening” has been developed to introduce interstitial carbon atoms into stainless steel surfaces without the formation of carbides. Surface hardening of machine elements such as impellors or fasteners would improve performance regarding cavitation and galling resistance, and has intensified interest in this process. The interstitial hardening...
متن کاملMirror Surface Finishing of Hardened Die Steel by High-power Ultrasonic Elliptical Vibration Cutting
Ultrasonic elliptical vibration cutting has recently been utilized in industry for finishing of various precision parts such as mirror surface finishing and precision micro machining of dies and molds. However, its application has been limited to high-cost ultra-precision machining, where depth of cut is typically in a range from a few micrometers to several tens of micrometers due to power lim...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 2018
ISSN: 0915-1559,1347-5460
DOI: 10.2355/isijinternational.isijint-2017-460