Surface grain size and texture after annealing ground zirconia
نویسندگان
چکیده
منابع مشابه
Hydrothermal synthesis of nano-size zirconia using commercial zirconia powder: process optimization through response surface methodology
A hydrothermal method for preparation of nano-size zirconia has been studied to optimize the effective parameters (precursor concentration, temperature and time) using response surface methodology (RSM). The synthesized zirconia samples were characterized through X-ray diffraction (XRD), scanning electron microscope (SEM) and transmission electron microscopy (TEM) analyses to identify mean nano...
متن کاملAverage Grain Size Determination Using Mathematical Morphology and Texture Analysis
Many industrial processes need information about material grain size. In this work we examined rolled chrome concentrate to determine the average grain size. Test material was sieved into 15 fractions, from 37 μm to 500 μm. The analysis method can be divided in three sections: preprocessing, feature extraction and classification. Mathematical morphology was used as preprocessing method, with gr...
متن کاملGrain size limit of nanocrystalline materials obtained by annealing glasses
A lower limit for the grain size of nanocrystalline solids obtained by crystallization of the glass and its dependency on the crystallization temperature are thermodynamically considered. It is found that the nanocrystalline materials have the smallest grain size when the crystallization temperature is roughly half of the melting temperature. At this temperature, the Gibbs free energy differenc...
متن کاملGrain size influence on the thermal properties of stabilized zirconia-nano spinel (Al2O3-MgO) composites
Abstract. Cubic crystalline oxides such as Y2O3 and MgO is used to stabalized zirconia phases at high temperature. In this paper the Y2O3 powder was added to stabilized zirconia and preparing a mixture of MgAl2O4 Spinel by mixing 1mol of nano-MgO with 1 mol of nano-Al2O3 powders. The spinel was added to the Y2O3-ZrO2 by various weight percentage (5, 10, 15, 20 and 25 wt%), and after that the sp...
متن کاملEvolution of Texture and Grain Size during Equal Channel Angular Extrusion of Pure Copper and 6012 Aluminum
Among different SPD techniques, Equal channel Angular Pressing has attracted the most attentions, because of applying large strain to solid bulk materials. In this research, ECAP process up to 6 passes was carried out on a pure copper and a 6012 Al-Mg-Si alloy with BC route in ECAP dies with Φ=120 and Ψ=20 and diameter of 20and 10 millimeter respectively. Moreover, X-ray diffraction (XRD) syste...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the European Ceramic Society
سال: 2016
ISSN: 0955-2219
DOI: 10.1016/j.jeurceramsoc.2015.12.022