Surface formation in direct chill (DC) casting of 6082 aluminium alloys

Macrosegregation in direct-chill casting of aluminium alloys

Continuous Roll Casting of Aluminium Alloys– Casting Parameters Analysis

The continuous roll casting process (CRC), consisting of continuous strip casting between rolls, is now well known. It was introduced by the SCAL Company (Pechiney Ugine Kuhlmann Group) 60 years ago 1 . The process consists of solidifying aluminum or aluminum alloys between the water-cooled rolls of a duo rolling mill. From the moment when solidification is completed to the moment when the stri...

Modelling of Precipitation Hardening in Casting Aluminium Alloys

Precipitation hardening, because it involves the hardening of the material over a prolonged time, is also called age hardening, or ageing. By the appropriate heat treatment of precipitation hardening, the strength or hardness of some heat-treatable aluminium alloys can be enhanced by the formation of nano-meter sized second-phase precipitated particles within the original phase matrix. The fine...

Stereometry specification and properties of anodization surface of casting aluminium alloys

Purpose: The aim of the work is presents the influence of casting method and anodic treatment parameters on properties, thickness and structure of an anodic layer formed on aluminium casting alloys. Design/methodology/approach: Investigations were carried out on the laser profile measurement gauge MicroProf from company FRT, abrasive wear test was made with using ABR-8251 equipment delivered by...

Numerical Modeling of Macrosegregation during the Direct-Chill Casting of an Al alloy Billet

ABSTRACT Macrosegregation has been received high attention in the solidification modeling studies. In the present work, a numerical model was developed to predict the macrosegregation during the DC Casting of an Al-4.5wt%Cu billet. The mathematical model developed in this study consists of mass, momentum, energy and species conservation equations for a two-phase mixture of liquid and solid in a...