Surface Flashover of Dielectrics During Low-Energy Electron Beam Irradiation in Vacuum
نویسندگان
چکیده
منابع مشابه
Effects of ultraviolet (UV) irradiation in air and under vacuum on low-k dielectrics
This work addresses the issue as to whether ultraviolet radiation of wavelengths longer than 200 nm can break Si-CH3 bonds in porous low-k dielectrics. To resolve this issue, porous SiCOH films (k = 2.3) were exposed to 4.9 eV (254 nm) ultraviolet (UV) radiation in both air and vacuum for 1 hour. Using Fourier Transform Infrared (FTIR) spectroscopy, the chemical structures of the dielectric fil...
متن کاملLow-energy electron beam focusing in self-organized porous alumina vacuum windows
Micromachined, micron-thick porous alumina membranes with closed pore endings show high electron transparency above an energy of 5 keV. This is due to the channeling of electrons along the negatively charged insulating pores after surmounting the thin entrance layer. We also find a sharp hightransparency energy window at energies as low as 2 keV which may be the result of a local maximum of cha...
متن کاملElectron imaging of dielectrics under simultaneous electron–ion irradiation
We demonstrate that if charging caused by electron irradiation of an insulator is controlled by a defocused flux of soft-landing positive ions, secondary electron ~SE! images can contain contrast due to lateral variations in ~i! changes in the SE yield caused by subsurface trapped charge and ~ii! the SE-ion recombination rate. Both contrast mechanisms can provide information on microscopic vari...
متن کاملEffects of vacuum ultraviolet irradiation on trapped charges and leakage currents of low-k organosilicate dielectrics
Articles you may be interested in Effect of vacuum-ultraviolet irradiation on the dielectric constant of low-k organosilicate dielectrics Appl. Bandgap measurements of low-k porous organosilicate dielectrics using vacuum ultraviolet irradiation Appl. The effects of plasma exposure and vacuum ultraviolet irradiation on photopatternable low-k dielectric materials Effect of vacuum ultraviolet and ...
متن کاملElectron Beam Irradiation Applications
The irradiation of materials with electron beams or X rays is used extensively to enhance or modify their physical, chemical or biological properties. These electron beam “irradiators” cover a very wide range of accelerators technology, beam current and energies to produce a wide variety of products, mostly with polymers. They also are used for curing ink, coatings, and adhesives as well as for...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEJ Transactions on Fundamentals and Materials
سال: 1999
ISSN: 0385-4205,1347-5533
DOI: 10.1541/ieejfms1990.119.2_177