SURFACE FINISHING OF 3D PRINTED SAMPLE MANUFACTURATED BY FUSED DEPOSITION MODELING
نویسندگان
چکیده
منابع مشابه
Surface Finishing for Printed Circuit Boards
In a world of ever-increasing electronic component complexity and pin count requirements for component packaging, focus is once again on the age-old question of "How do we preserve solderable surfaces between PWB manufacturing and assembly?" PCB manufacturers today are faced with the decision of which surface finish to offer their customers, while their customers struggle with choosing the best...
متن کاملStrengthening of 3D Printed Fused Deposition Manufactured Parts Using the Fill Compositing Technique
In this paper, we present a technique for increasing the strength of thermoplastic fused deposition manufactured printed parts while retaining the benefits of the process such as ease, speed of implementation, and complex part geometries. By carefully placing voids in the printed parts and filling them with high-strength resins, we can improve the overall part strength and stiffness by up to 45...
متن کاملFinishing of ABS-M30 Parts Manufactured with Fused Deposition Modeling With Focus on Dimensional Accuracy
Fused Deposition Modeling (FDM) parts are prone to process-related rough and wavy surfaces with stair-stepping effects whenever the parts produced have sloped or rounded geometries. These stair-stepping effects can be reduced by using a smaller slice height, but complete elimination is not possible. In this paper, FDM parts manufactured with the material ABS-M30 are finished using mass finishin...
متن کاملCurved Layer Fused Deposition Modeling
Current Fused Deposition Modeling (FDM) technologies deposit material as flat layers. The result is a “stair-case” effect on non-vertical or horizontal surfaces, and compromised part strength because of weakness between the laminations. This paper describes a FDM method through which layers of build material are deposited as curved layers following the shape of the part, thus removing the stair...
متن کاملThree-Dimensional (3D) Printing of Polymer-Metal Hybrid Materials by Fused Deposition Modeling
Fused deposition modeling (FDM) is a three-dimensional (3D) printing technology that is usually performed with polymers that are molten in a printer nozzle and placed line by line on the printing bed or the previous layer, respectively. Nowadays, hybrid materials combining polymers with functional materials are also commercially available. Especially combinations of polymers with metal particle...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MM Science Journal
سال: 2017
ISSN: 1803-1269,1805-0476
DOI: 10.17973/mmsj.2017_12_201753