Surface Decontamination in an Autoclave Chamber with Formaldehyde Gas
نویسندگان
چکیده
منابع مشابه
Measurement of formaldehyde concentrations in a subatmospheric steam-formaldehyde autoclave.
A method has been developed for measuring formaldehyde concentrations in a subatmospheric steam-formaldehyde autoclave. Data obtained using this method indicate that the concentration of formaldehyde in the chamber atmosphere is not homogeneous and that it decreases rapidly with time. The penetration of formaldehyde vapour into narrow tubes has also been investigated and was shown to be depende...
متن کاملMicrofabricated Formaldehyde Gas Sensors
Formaldehyde is a volatile organic compound that is widely used in textiles, paper, wood composites, and household materials. Formaldehyde will continuously outgas from manufactured wood products such as furniture, with adverse health effects resulting from prolonged low-level exposure. New, microfabricated sensors for formaldehyde have been developed to meet the need for portable, low-power ga...
متن کاملSurface Decontamination by Dielectric Barrier Discharge Plasma
Background: Dielectric barrier discharge (DBD), a source of non-thermal plasma, is used in surface decontamination. Objective: To study the effect of DBD plasma treatment, we evaluated the effect of plasma exposure time on inactivation of Bacillus subtilis. Results: Applying the DBD plasma to the culture of B. subtilis caused complete sterilization of the surface without any thermal effects. In...
متن کاملDestruction of spores on building decontamination residue in a commercial autoclave.
The U.S. Environmental Protection Agency conducted an experiment to evaluate the effectiveness of a commercial autoclave for treating simulated building decontamination residue (BDR). The BDR was intended to simulate porous materials removed from a building deliberately contaminated with biological agents such as Bacillus anthracis (anthrax) in a terrorist attack. The purpose of the tests was t...
متن کاملAdsorption of formaldehyde by various surfaces during gaseous decontamination.
Study of the effect of atmospheric relative humity (RH) on the adsorption of paraformaldehyde-generated formaldehyde gas on various surfaces and the effect of the adsorbed formaldehyde on the death rate of bacterial spores showed that increasing the RH caused a corresponding increase of formaldehyde levels on all surfaces. The amount peaked at 83% RH. The levels obtained at 100% RH were slightl...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Microbiology
سال: 1971
ISSN: 0003-6919
DOI: 10.1128/aem.22.2.250-251.1971