Surface Conductivity of Polyimide Films Modified by KrF Excimer Laser Irradiation.
نویسندگان
چکیده
منابع مشابه
Preparation of periodic surface structures on doped poly(methyl metacrylate) films by irradiation with KrF excimer laser
In this work, we describe laser modification of poly(methyl methacrylate) films doped with Fast Red ITR, followed by dopant exclusion from the bulk polymer. By this procedure, the polymer can be modified under extremely mild conditions. Creation of surface ordered structure was observed already after application of 15 pulses and 12 mJ cm(-2) fluence. Formation of grating begins in the hottest p...
متن کاملAnalysis of photodecomposition of gaseous chlorobenzene by KrF excimer laser.
Gaseous monochlorobenzene was irradiated with KrF excimer laser (248 nm) under reduced pressure. The photodecomposition was an apparent first order reaction. When the system contained no additive gas, the photolysis was found to give benzene (conversion yield: 49%) in the gas phase and many unidentified products in the solid phase. On the other hand, in the presence of oxygen, carbon dioxide (1...
متن کاملEffects of KrF „248 nm... excimer laser irradiation on electrical and optical properties of GaN:Mg
The electrical and optical characteristics of GaN:Mg irradiated by a pulsed KrF ~248 nm! excimer laser have been studied. When an as-grown Mg-doped GaN film was irradiated by an excimer laser at an energy density of 590 mJ/cm in a nitrogen atmosphere, the hole concentration was drastically increased up to 4.42310 cm. Furthermore, a GaN:Mg thin film, which was treated by laser irradiation follow...
متن کاملCharacterisation of dentin surfaces processed with KrF excimer laser radiation.
In the present work, the surface microtexture and chemical changes induced in human dentin by laser processing with KrF excimer laser radiation using fluences ranging from 0.5 to 20 J/cm2 were studied by SEM, XPS and FTIR. Two distinct behaviours were observed in the evolution of surface topography. In some samples, the laser-treated surface remained flat, independently of the fluence used. It ...
متن کاملبررسی تأثیر تابش لیزر بر خواص الکتریکی و ساختاری لایه‌های نازک ZnO
In this paper, ZnO thin film was prepared by sol-gel process on glass substrates. The deposited films were dried at 100 and 240 ˚C and then annealed at 300, 400 and 500 ˚C. The two-probe measurement showed that resistance of as-prepared films is very high. The KrF excimer (λ=248 nm) laser irradiation with 1000 pulses, frequency of 1 Hz and 90 mJ/cm2 energy on surface of film resulted in the re...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: KOBUNSHI RONBUNSHU
سال: 1994
ISSN: 0386-2186,1881-5685
DOI: 10.1295/koron.51.361