Surface Conditioning and Silanization for Ceramic Adhesion
نویسندگان
چکیده
منابع مشابه
Influence of surface conditioning on ceramic microstructure and bracket adhesion.
The objective of this study was to investigate the influence of different conditioning procedures on various ceramic microstructures and bracket adhesion. Ceramic specimens (feldspathic, leucite, leucite-free, and fluorapatite) were mechanically conditioned (n = 20 per ceramic type) with conventional hydrofluoric acid (5 per cent HF; 60/30 seconds), buffered hydrofluoric acid (9.6 per cent BHF;...
متن کاملCeramic repair: influence of chemical and mechanical surface conditioning on adhesion to zirconia.
AIMS To evaluate the influence of mechanical surface treatment and chemical primer application on the composite shear bond strength to zirconia. METHODS Eighty blocks of Lava Frame Zirconia were randomly assigned to the experimental groups, according to the several possible combinations between mechanical (untreated/aluminum oxide sandblast) and chemical treatment (no primer/Monobond Plus/Exp...
متن کاملSurface characterization of feldspathic ceramic using ATR FT-IR and ellipsometry after various silanization protocols.
OBJECTIVES This study characterized the feldspathic ceramic surfaces after various silanization protocols. METHODS Ceramic bars (2 mm × 4 mm × 10 mm) (N = 18) of feldpathic ceramic (VM7, VITA Zahnfabrik) were manufactured and finished. Before silane application, the specimens were ultrasonically cleaned in distilled water for 10 min. The ceramic specimens were randomly divided into nine group...
متن کاملEffects of post surface conditioning before silanization on bond strength between fiber post and resin cement
PURPOSE Post surface conditioning is necessary to expose the glass fibers to enable bonding between fiber post and resin cement. The purpose of the present study was to evaluate the effect of different surface conditioning on tensile bond strength (TBS) of a glass fiber reinforced post to resin cement. MATERIALS AND METHODS In this in vitro study, 40 extracted single canal central incisors we...
متن کاملHeat treatment following surface silanization in rebonded tribochemical silica-coated ceramic brackets: shear bond strength analysis
OBJECTIVE This study aimed to evaluate the effects of heat treatment on the tribochemical silica coating and silane surface conditioning and the bond strength of rebonded alumina monocrystalline brackets. MATERIAL AND METHODS Sixty alumina monocrystalline brackets were randomly divided according to adhesive base surface treatments (n=20): Gc, no treatment (control); Gt, tribochemical silica c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Scientific Dentistry
سال: 2018
ISSN: 2277-7687,2278-3865
DOI: 10.5005/jsd-8-2-32