Surface characterization of rhodium-copper alloys
نویسندگان
چکیده
منابع مشابه
Surface Characterization and Tribological Behaviour of Ti-Ni-P Intermetallic Coatings on Titanium Alloys
In this research, tribological behavior of Ti-Ni-P intermetallic coatings on titanium substrates have been investigated under dry reciprocating conditions. Hardness profile testing results exhibit that high surface hardness has been attained and static indentation result shows that the intermetallic coating has better adhesion strength than the conventional ceramic coatings. In this respect, th...
متن کاملSurface Characterization and Tribological Behaviour of Ti-Ni-P Intermetallic Coatings on Titanium Alloys
In this research, tribological behavior of Ti-Ni-P intermetallic coatings on titanium substrates have been investigated under dry reciprocating conditions. Hardness profile testing results exhibit that high surface hardness has been attained and static indentation result shows that the intermetallic coating has better adhesion strength than the conventional ceramic coatings. In this respect, th...
متن کاملHigh-Throughput Characterization of Surface Segregation in CuxPd1 x Alloys
High-Throughput Characterization of Surface Segregation in CuxPd1 x Alloys Deepika Priyadarshini, Petro Kondratyuk, Yoosuf N. Picard, Bryan D. Morreale, Andrew J. Gellman, and James B. Miller* National Energy Technology Laboratory, U.S. Department of Energy, Pittsburgh, Pennsylvania 15236, United States Department of Chemical Engineering and Department of Materials Science and Engineering, Carn...
متن کاملErratum: Thermal Expansion of Platinum and Platinum-Rhodium Alloys
Erratum: Equation (22) contains an error. It should read 100 ɛ(t, 0 °C) = 8.79 × 10 −4 t + 0.805 × 10 −7 t 2. (22) Also, the data presented in Table 12 under the column Day and Sosman Eq. (22) should be evaluated by using the corrected Eq. (22) above.
متن کاملStress Induced Phase Transition of Iron-Rhodium Alloys
Stress-induced phase transitions(B2-Llo, B2-fcc) on an FeRh alloy were investigated with X-ray diffraction (XRD) and transmission electron microscopy(TEM). An Fe-SO.Sat%Rh alloy was rolled to 80pm thickness, and annealed at 1370K for 173ks. Annealed sample sheets were cold rolled at various rolling rates, and changes of the sample alloy on the phase state were investigated with XRD. The L lo ph...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Surface and Interface Analysis
سال: 1990
ISSN: 0142-2421,1096-9918
DOI: 10.1002/sia.7401601109