Surface Characterization of Powder Particles. Surface Properties and Powder Properties.
نویسندگان
چکیده
منابع مشابه
Effect of Surface Densification on the Microstructure and Mechanical Properties of Powder Metallurgical Gears by Using a Surface Rolling Process
Powder metallurgy (PM) components are widely used in the auto industry due to the advantage of net-shape forming, low cost, and high efficiency. Still, usage of PM components is limited in the auto industry when encountering rigorous situations, like heavy load, due to lower strength, hardness, wear resistance, and other properties compared to wrought components due to the existence of massive ...
متن کاملCharacterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method
In this paper, titanium dioxide nano-particles were synthesized by sol-gel method in acidic atmosphere. The microstructure, morphology, optical band gap, and hydrophilicity of the sample were studied. Optical band gap of titanium dioxide was probed via Diffuse Reflectance Spectra (DRS) and contact angle (CA) was measured to investigate surface activity. XRD analysis was used to study crys...
متن کاملResearch of Surface Condition of Powder Details
ABSTRACT Surface condition of powder details on the different stages of producing of joining elements is the important factor that influences on the choice of technological conditions of operations and end-use properties and running ability of product. Generally, the roughness, porosity and microstructure determine the surface condition. The results of investigation of surfaces of iron-copper d...
متن کاملMetal Powder-filled Polyethylene Composites. v. Thermal Properties Metal Powder-filled Polyethylene Composites. v. Thermal Properties
Thermal properties—such as thermal conductivity, thermal diffusivity, and specific heat—of metal (copper, zinc, iron, and bronze) powder-filled high-density polyethylene composites are investigated experimentally in the range of filler content 0–24% by volume. Experimental results show a region of low particle content, 0–16% by volume, where the particles are distributed homogeneously in the po...
متن کاملSurface Treatment of Powder Metallurgical Compacts
Introduction Powder metallurgy (p/M) is a rapidly expanding technology for manufacturing of structural parts. The PA4 process provides economical as well as technical benefits over conventional processing of wrought material. It is possible to fabricate high quality, complex parts to close tolerances without machining. The energy consumption is low and the material utilisation and productivity ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Powder Technology, Japan
سال: 1999
ISSN: 0386-6157,1883-7239
DOI: 10.4164/sptj.36.205