Surface Characterization of Biocompatible Materials
نویسندگان
چکیده
منابع مشابه
Cellular micropatterns on biocompatible materials.
We present a method to produce micropatterns of cells on tissue culture substrates. A network of deep elastomeric microchannels defining the desired pattern is sealed onto the surface of interest, and a protein template is created by injecting sub-milliliter quantities of protein solution into the microchannels. Protein adsorbs only on the areas that were exposed to the microflow. After the cha...
متن کاملSurface characterization of titanium-based implant materials.
This study examined the effects of different treatments (polished, electropolished, and grit-blasted) on the surface morphology and chemistry of commercially pure titanium and titanium-6% aluminum-4% vanadium. The structure and composition of the surfaces were evaluated using scanning electron microscopy, atomic force microscopy, energy dispersive spectroscopy, Auger microprobe analysis, and x-...
متن کاملSelective Deposition of Biocompatible Sol-Gel Materials
An aqueous sol-gel route has been developed for electrochemically controlled deposition onto micro and nanofabricated electrodes. TEOS and MeTEOS were hydrolyzed under acidic conditions, and alcohol products were removed by distillation. The resulting clear sol has a hydrolysis ratio between 40 and 45. Following hydrolysis, pH was raised to 5.0 with addition of potassium hydroxide. At room temp...
متن کاملSynthesis of CdTe quantum dots coated with biocompatible materials and investigation of their identification Properties
Fingerprint identification or dactyloscopy is a method for human identification. The impressions left by a human finger on surfaces are not visible to naked eyes (latent fingerprint); therefore, they require revelation to become visible and identified. Within the last century, several fingerprint revelation techniques such as optical, physical, and chemical were studied. These traditional metho...
متن کاملBiocompatible Magnesium Alloys as Degradable Implant Materials - Machining Induced Surface and Subsurface Properties and Implant Performance
Annually several million people suffer bone fractures caused by accidents or diseases. Many of those fractures are too complex for an external medical treatment but have to be surgically fixated by internal bone implants. Traditional methods of osteosynthesis or osteotomy use permanent metal implants e.g. bone screws and bone plates made of steel or titanium alloys, but permanent metal implants...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sen'i Gakkaishi
سال: 1987
ISSN: 0037-9875,1884-2259
DOI: 10.2115/fiber.43.12_p489