Surface and Optical Characteristics of Cobalt Dopped-titanium Oxide Film Fabricated by Water Spray Pyrolysis Technique
نویسندگان
چکیده
منابع مشابه
Structural and Optical Properties of Nanocrystalline Nickel Oxide Thin Film by Spray Pyrolysis Technique
It is necessary to study the optical properties of thin films to fabricate optoelectronic and interference devices. One of the methods in thin film preparation is the spray pyrolysis technique, which involves many technical aspects for the preparation of uniform coating. In the present study, Nickel Oxide (NiO) thin film is prepared by spray pyrolysis technique. NiO thin film was deposited usin...
متن کاملPreparation and growth of SnS thin film deposited by spray pyrolysis technique
In this paper thin films of tin sulfide (SnS) were deposited on the glass substrates using spray pyrolysis method with the substrate temperatures in the range of 400–600℃, keeping the other deposition parameters constant. In this work the characteristic of SnS thin films investigated. The XRD pattern and optical transmittance of thin films also are discussed. With the change in concen...
متن کاملStructural, Optical Investigation of Manganese Oxide Thin Films by Spray Pyrolysis Technique
Thin films of MnO2 are well suited for Electrochromic Photo-Voltaic (ECPV) effect and superconducting phenomenon (such as solar cells) due to its electrical and optical properties. MnO2 thin films were prepared on glass substrate using a simple and low-cost chemical spray pyrolysis technique at different substrate temperature. The MnO2 films were characterized by X-ray diffraction (XRD), transm...
متن کاملInvestigation on the ordering of titanium oxide nanotubes fabricated by anodization on different substrate surface morphologies
In this study, titanium oxide nanotubes anodized on threedifferent surface morphologies of titanium foils, were investigated. AFM imagesis used to show different surface roughness of these foils. Nanotubes wereanodized on titanium foils with 1) no polishing process (A sample), 2)electropolishing process (B sample) and 3) electropolishing process in ethanolicelectrolyte (C sample). To study the ...
متن کاملpreparation and growth of sns thin film deposited by spray pyrolysis technique
in this paper thin films of tin sulfide (sns) were deposited on the glass substrates using spray pyrolysis method with the substrate temperatures in the range of 400–600℃, keeping the other deposition parameters constant. in this work the characteristic of sns thin films investigated. the xrd pattern and optical transmittance of thin films also are discussed. with the change in concen...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Korean Journal of Materials Research
سال: 2005
ISSN: 1225-0562
DOI: 10.3740/mrsk.2005.15.3.209