Surface Alloying of the Casting in the Casting Mold
نویسندگان
چکیده
منابع مشابه
Enhancing Surface Roughness of Castings When Sand-resin Mold Casting
T. Kovalyova, E. Eremin, S. Arinova, I. Medvedeva, A. Dostayeva, Karaganda State Technical University, Karaganda, Kazakhstan, Omsk State Technical University, Russia. In this connection, studies aimed at improving the obtaining process of high-quality castings of mining equipment are relevant. At the same time there is a need for studying physical and mechanical relationship of mixes in which a...
متن کاملInterfacial Friction-Related Phenomena in Continuous Casting with Mold Slags
Many phenomena in continuous casting including the formation of surface defects are greatly affected by heat transfer in the mold. The interfacial slag layers between the solidifying steel shell and the mold wall dominates the resistance to heat removal and thus controls mold heat transfer. Surface defects, such as longitudinal cracks and star cracks have been associated with variation of slag ...
متن کاملInclusion Removal by Bubble Flotation in Continuous Casting Mold
Fundamentally-based computational models are developed to quantify the removal of inclusions by bubbles during the continuous casting of steel. First, the attachment probability of inclusions on a bubble surface is investigated based on fundamental fluid flow simulations, incorporating the turbulent inclusion trajectory and sliding time of each individual inclusion along the bubble surface as a...
متن کاملInclusion Removal by Bubble Flotation in a Continuous Casting Mold
Fundamentally based computational models are developed and applied to quantify the removal of inclusions by bubbles during the continuous casting of steel. First, the attachment probability of inclusions on a bubble surface is investigated based on fundamental fluid flow simulations, incorporating the turbulent inclusion trajectory and sliding time of each individual inclusion along the bubble ...
متن کاملModeling of Continuous-Casting Defects Related to Mold Fluid Flow
The quality of continuous-cast steel is greatly influenced by fluid flow in the mold, particularly at the meniscus. Recent examples of computational model applications at the University of Illinois are presented to investigate the formation of several different types of defects related to flow phenomena. The amount of gas injection into the tundish nozzle to avoid air aspiration is quantified b...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Engineering and Applied Sciences
سال: 2018
ISSN: 2575-2022
DOI: 10.11648/j.eas.20180303.12