Suppression of low-frequency pressure pulsations in an open jet wind tunnel by corner vortex generators
نویسندگان
چکیده
منابع مشابه
suppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولA Further Wind Tunnel Investigation of Underwing Jet Interference bY
SUMMARY Further experiments, to investigate the interference of the Jet stream issuing from a high bypass ratio engine mounted below a wing, are described. Tests have been made with a two-dimensional wing, and two nozzle shapes representing engues with different fan cowl lengths. A Jet blonng from these nozzles produced negligible interference on the wing upper surface. However, a change in th8...
متن کاملUltrasonic Pulsations of Pressure in a Water Jet Cutting Tool
Original scientific paper Water flow in a tool for water jet cleaning and cutting is evaluated in this paper. There are ultrasonic pulsations of high pressure in the given domain. The efficiency of the amplification of high pressure pulsations in the transitional space between larger and smaller pipes is analysed. Three types of transitional spaces are compared in the paper: step change, conica...
متن کاملLow-Speed Wind-Tunnel Measurements 1 of Damping in Yaw (nv) on an A.R.9 Jet-Flap Complete -Model bY
Measurements have been made cf the yaw-dam@g derivative, n A.R.9 jet-flap ccm$ete model, SI' a*; using the free-oscillation technique. experimental apparatus and procedure are fullydescribtd, with the exception of the special air-bearing support system, which has been the subject of a previcus Repcrt. Results are given cf damping i,leasurements at wing incidence9 of Oc, qOc and 20' with jet-fla...
متن کاملAn Investigation of the Stresses in a Wind Tunnel Corner Section
This Report describe8 how the stresses in a wind tunnel corner section were investigated by means of a l/6 scale model. Roth the brittle coating technique and elevated temperature strain gauge8 were employed. lko separate tests were performed in which It was attempted to slmlate the thermal stresses and the pressure stresses respectively. Methods of overcoming 8ome interesting experimental prob...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: AIP Advances
سال: 2021
ISSN: 2158-3226
DOI: 10.1063/5.0056092