Suppression of chatter marks in surface grinding by using dynamic damper.
نویسندگان
چکیده
منابع مشابه
suppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولDynamic Magnetorheological Damper for Orthotic Tremor Suppression
This paper explores the design methodology and effectiveness of small-scale magnetorheological dampers (MRDs) in applications that require rapidly variable damping. Previously applications of MRDs have been chiefly limited to vehicle shock absorbers and seismic vibration attenuators. There has been recent biomedical interest in active-damping technology, particularly in the field of rehabilitat...
متن کاملMachine Tool Chatter Suppression Using Spindle Speed Variation
First part of the thesis deals with the dynamics and stability of nonlinear delay gyroscopic systems with periodically varying delay. The aim is to demonstrate that greater depths of cut may be achieved in a boring process (2 DOF) when the speed of the spindle is modulated sinusoidally instead of being kept constant. Since the variation of spindle speed is small and independent of the tool moti...
متن کاملSurface hardness improvement in high efficiency deep grinding process by optimization of operating parameters
The grinding is one of the most important methods that directly affects tolerances in dimensions, quality and finished surface of products. One of the major problems in the material removal processes specially grinding is the heat generation during the process and the residual tensile stress in the surfaces of product. Therefore, optimization of High Efficiency Deep Grinding (HEDG) process is t...
متن کاملApplication of Spindle Speed Variation for Chatter Suppression in Turning
In the present paper the chatter instability of variable speed machining is studied. Though, there exist numerical methods for the computation of the stability lobes for variable speed machining, especially in turning processes the potential of an active spindle speed variation for chatter suppression is mostly unexploited. In the case of a slowly time-varying spindle speed, which is practicabl...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Precision Engineering
سال: 1987
ISSN: 1882-675X,0912-0289
DOI: 10.2493/jjspe.53.795