Superplasticity of .DELTA.-ferrite/austenite duplex stainless steels.
نویسندگان
چکیده
منابع مشابه
Super Plasticity of /α Duplex Stainless Steels
In this paper the studies of the two-phase super Plasticity stainless steels is studied. The aim of this study obtained the suitable criteria to thermo-mechanical treatment condition for decrease the microstructure (grain size) and super plasticity property in two-phase stainless steels. Also here we want to show the appropriate ranges of temperature and strain rate used in the process super pl...
متن کاملCorrosion performance of welds in duplex, superduplex and lean duplex stainless steels
To achieve good corrosion resistance in a weld is much more challenging than for plate or sheet material, which has undergone controlled rolling, heat treatment and pickling processes in the steel mill. The choice of weld procedure and parameters, filler metal and shielding gas all play important roles. For duplex and lean duplex grades it is essential to ensure that an adequate amount of auste...
متن کاملInfluence of Initial Microstructure on Hot Deformation Behavior of Duplex Stainless Steels
In this research the effect of initial microstructure on hot deformation behavior in terms of Ferrite-to-Austenite ratios is studied. Two types of stainless steels C1 and C2 were homogenizing heat-treated and deformed under hot compression examinations at temperatures 900ºC and 1100ºC at strain rate of 0.1s-1. The results showed that the flow stress levels of specimens are strongly r...
متن کاملEffect of Secondary Phase Precipitation on the Corrosion Behavior of Duplex Stainless Steels
Duplex stainless steels (DSSs) with austenitic and ferritic phases have been increasingly used for many industrial applications due to their good mechanical properties and corrosion resistance in acidic, caustic and marine environments. However, DSSs are susceptible to intergranular, pitting and stress corrosion in corrosive environments due to the formation of secondary phases. Such phases are...
متن کاملAssessment of thermal embrittlement in duplex stainless steels 2003 and 2205 for nuclear power applications
Duplex stainless steels are desirable for use in power generation systems because of their attractive combination of strength, corrosion resistance and cost. However, thermal embrittlement at intermediate homologous temperatures of 475 C and below, limits upper service temperatures for many applications. New lean grade duplex alloys have improved thermal stability over standard grades and poten...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Iron and Steel Institute of Japan
سال: 1985
ISSN: 0021-1583,1881-1183
DOI: 10.2355/isijinternational1966.25.69