Superplasticity in the Fe-6.7%Al-1.5%Cr-1.4%C Alloy.
نویسندگان
چکیده
منابع مشابه
Enhanced superplasticity in commercially pure titanium alloy
The superplasticity of commercially pure titanium alloy at high temperature was studied and the dynamic recrystallization phenomenon of the alloy was investigated by using electron back scattered diffraction. A two-step deformation method was used to increase the ductility of the alloy from 188% to 243%. 2004 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
متن کاملEffect of external stress on the Fe-Cr phase separation in 15-5 PH and Fe-15Cr-5Ni alloys.
The effect on Fe-Cr phase separation of a uniaxial stress during thermal ageing at 425 °C is investigated on a Fe-15Cr-5Ni steel, a model alloy of commercial 15-5 PH steel. The applied stress is shown to accelerate the ageing kinetics, and influence the morphology of Cr rich domains. A dependence of the phase separation decomposition kinetics on the relative orientations of the load and the cry...
متن کاملNanostructurization of Fe-Ni Alloy
Data about an effect of cyclic γ-α-γ martensitic transformations on the structure state of reverted austenite Fe-31.7 wt.% Ni-0.06 wt.% C alloy are presented. The effect of multiple direct γ-α and reverse α-γ martensitic transformations on fragmentation of austenitic grains has been investigated by electron microscopy and X-ray diffraction methods. An ultrafine structure has been formed by nano...
متن کاملDEVELOPMENT OF HARDNESS IN A Fe- BASED NANO-COMPOSITE ALLOY
Achieving extreme hardness in the newly synthetic steel formed by converting from initial amorphous state to subse-quent crystalline structure –named as devitrification process- was studied in this research work. Results of TEM observa-tions and XRD tests showed that crystallized microstructure were made up four different nano-scale phases i.e., α-Fe, Fe 36 Cr12 Mo10 , Fe 3 C and Fe3 B. More, V...
متن کاملAchieving superplasticity in a Bi-Sn alloy processed by equal- channel angular pressing
Equal-channel angular pressing (ECAP) was utilized to process a Bi‒42Sn eutectic alloy at room temperature using processing route A for 1, 2, 4, and 8 passes. Tensile testing was performed at room temperature under initial strain rates in the range of 1.0 × 10 -5 to 1.0 × 10 -2 s -1 . The results demonstrate that processing by ECAP improves the ductility in this material and the elongations to ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 1997
ISSN: 0915-1559
DOI: 10.2355/isijinternational.37.93