Superhard CrN/MoN coatings with multilayer architecture
نویسندگان
چکیده
منابع مشابه
Superhard nanocomposite coatings. From basic science toward industrialization*
A variety of superhard coatings with Vickers plastic hardness exceeding 40 GPa have been reported by several research groups during the last five years (for recent reviews see refs [1,2]). However, one has to distinguish between superhard nanocomposites, such as nc-TiN/a-Si3N4, nc-TiN/a-Si3N4/aand nc-TiSi2, nc-(Ti1-xAlx)N/a-Si3N4, nc-TiN/TiB2, ncTiN/BN, etc. where the high hardness originates f...
متن کاملLow Friction CrNMPP/TiNDCMS Multilayer Coatings
Transition metal nitrides like CrN and TiN are widely used in automotive applications due to their high hardness and wear resistance. Recently, we showed that a multilayer architecture of CrN and TiN, deposited using the hybrid-high power impulse magnetron sputtering (HIPIMS) and direct current magnetron sputtering (DCMS)-HIPIMS/DCMS deposition technique, results in coatings which indicate not ...
متن کاملEllipsometry of light scattering from multilayer coatings.
A scatterometer is extended and allows us to perform ellipsometric measurements on scattered light in each direction of space. Experimental data are given for single thin-film layers and optical coatings and reveal unexpected results. The phenomena are investigated by means of the electromagnetic theories of surface and bulk scattering that emphasize the role of partial correlation and localize...
متن کاملDelamination of multilayer thermal barrier coatings
Multilayer thermal barrier coatings (TBCs) on superalloy substrates are comprised of an intermetallic bond coat, a thermally grown oxide (TGO) layer, and a porous zirconia top coat that provides thermal protection. The TGO attains a thickness of 1±10 lm prior to failure, while the bond coat and zirconia layer are each about 50±100 lm thick. The preferred method for manufacturing TBCs comprises ...
متن کاملEvaluation of Tool Performance With Nanocrystalline Multilayer Coatings on the Machinability of Superalloy Inconel 718
In this paper, the performance of the cutting tool with nanocrystalline multilayer coatings (TiN+TiAlN) for machining of superalloy Inconel 718 in the dry and wet conditions was studied. The multi layer TiN and TiAlN with nanocrystalline structure was applied by physical vapor deposition technique (arc evaporation) on the WC-Co inserts. The results of the ball on disc wear test and the machinin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials & Design
سال: 2018
ISSN: 0264-1275
DOI: 10.1016/j.matdes.2018.05.001