Superficial Hardening in Orthogonal Cutting
نویسندگان
چکیده
منابع مشابه
Study of Cutting Temperature in Orthogonal Milling
Finite Element Method (FEM) based techniques are available to simulate metal cutting processes and offer several advantages including prediction of tool forces, distribution of stresses, and temperatures, estimation of tool wear, and residual stresses on machined surfaces, optimization of cutting tool geometry, and cutting conditions. However, work material flow stress and friction characterist...
متن کاملAnalysis of Orthogonal Metal Cutting Processes
The orthogonal metal cutting process for a controlled contact tool is simulated using a limit analysis theorem. The basic principles are stated in the form of a primal optimization problem with an objective function subjected to constraints of the equilibrium equation, its static boundary conditions and a constitutive inequality. An Eulerian reference co-ordinate is used to describe the steady ...
متن کاملA cutting-plane approach for the two-dimensional orthogonal non-guillotine cutting problem
The two-dimensional orthogonal non-guillotine cutting problem (NGCP) appears in many industries (like wood and steel industries) and consists in cutting a rectangular master surface into a number of rectangular pieces, each with a given size and value. The pieces must be cut with their edges always parallel or orthogonal to the edges of the master surface (orthogonal cuts). The objective is to ...
متن کاملA New Placement Heuristic for the Orthogonal Stock-Cutting Problem
This paper presents a new best-fit heuristic for the two-dimensional rectangular stock-cutting problem and demonstrates its effectiveness by comparing it against other published approaches. A placement algorithm usually takes a list of shapes, sorted by some property such as increasing height or decreasing area, and then applies a placement rule to each of these shapes in turn. The proposed met...
متن کاملA Slip-line Field for Ploughing during Orthogonal Cutting
Under normal machining conditions, the cutting forces are primarily due to the bulk shearing of the workpiece material in a narrow zone called the shear zone. However, under finishing conditions, when the uncut chip thickness is of the order of the cutting edge radius, a ploughing component of the forces becomes significant as compared to the shear forces. Predicting forces under these conditio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia CIRP
سال: 2017
ISSN: 2212-8271
DOI: 10.1016/j.procir.2016.06.017