Superconducting spin valves controlled by spiral re-orientation in B20-family magnets
نویسندگان
چکیده
منابع مشابه
An Improvement in Fluorocarbon Chain Re-orientation by Reactive Dyes
There is an increasing demand for air-dry performance of fluorocarbon finished materials. Thus, dyeing with different types of reactive, mono, bi, and multi-functional, dyes was evaluated as a novel treatment to create correct surface interface to maintain fluorocarbon performance without ironing or tumble drying. The effects of pre-treatment on fluorocarbon finishing of cotton fabric, a cellul...
متن کاملSuperconducting Materials for Magnets
Superconducting materials for magnets will be discussed from three viewpoints: firstly the basic physical properties of the materials themselves, secondly the constraints and preferences imposed by the requirements of magnet building and finally, the manufacture of magnet conductors as a commercial product.
متن کاملSuperconducting Magnets for Detectors
A Fermilab/KEK/University of Tskuba, Japan collaboration is designing a large superconducting solenoid for the Fermilab Collider Detector Facility (CDF). A review of the status of other superconducting solenoids built for colliding beams machines is presented and progress on the design of the CDF magnet is discussed. Two types of superconducting coils appear to be feasible; a bath-cooled cryost...
متن کاملEvidence for spin selectivity of triplet pairs in superconducting spin valves.
Spin selectivity in a ferromagnet results from a difference in the density of up- and down-spin electrons at the Fermi energy as a consequence of which the scattering rates depend on the spin orientation of the electrons. This property is utilized in spintronics to control the flow of electrons by ferromagnets in a ferromagnet (F1)/normal metal (N)/ferromagnet (F2) spin valve, where F1 acts as ...
متن کاملSuperconducting Magnets Development
SIS100: For SIS100 modified versions of the fast-ramped superferric magnets of the Nuclotron synchrotron at JINR Dubna will be used. The original Nuclotron dipole magnets produce an overall AC loss at 4 K of about 38 W/m (standard cycle: Bmax=2 T, dB/dt = 4 T/s, repetition rate of 1 Hz). It is necessary to reduce the loss at cryogenic temperatures at least by a factor of 2, the corresponding R&...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Physics Letters
سال: 2017
ISSN: 0003-6951,1077-3118
DOI: 10.1063/1.5000315