Super terahertz transparent electrodes
نویسندگان
چکیده
منابع مشابه
Highly compliant transparent electrodes
Adaptive optical devices based on electric field induced deformation of dielectric elastomers require transparent and highly compliant electrodes to conform to large shape changes. Electrical, optical, and actuation properties of acrylic elastomer electrodes fabricated with single-walled carbon nanotubes (SWCNTs) and silver nanowires (AgNWs) have been evaluated. Based on these properties, a fig...
متن کاملVoltage-controlled liquid-crystal terahertz phase shifter with indium-tin-oxide nanowhiskers as transparent electrodes.
Indium-tin-oxide nanowhiskers were employed as transparent electrodes in a liquid-crystal terahertz phase shifter. Transmittance of the device was as high as ∼75%. Phase shift exceeding π/2 at 1.0 THz is achieved in a ∼500 μm-thick cell. The driving voltage required for the device operating as a quarter-wave plate was as low as 17.68 V (rms), an improvement of nearly an order of magnitude over...
متن کاملTransparent and Stretchable Metal Electrodes
Thin layers of lamellar-forming polystyrene-block-poly (methyl-methacrylate) (PS-b-PMMA) provide the templates for fabricating nanowires with a “fingerprint” morphology. The electrical characteristics of the nanowires were measured, and largely deviated from simulated devices due to high defect density. Their highly curved conformation makes the nanowires strong candidates for electrical testin...
متن کاملCatoptric electrodes: transparent metal electrodes using shaped surfaces.
An optical electrode design is presented that theoretically allows 100% optical transmission through an interdigitated metallic electrode at 50% metal areal coverage. This is achieved by redirection of light incident on embedded metal electrode lines to an angle beyond that required for total internal reflection. Full-field electromagnetic simulations using realistic material parameters demonst...
متن کاملA new method for obtaining transparent electrodes.
In this article, we propose a simple scheme to make a metallic film on a semi-infinite substrate optically transparent, thus obtaining a completely transparent electrode in a desired frequency range. By placing a composite layer consisting of dielectric and metallic stripes on top of the metallic one, we found that the back-scattering from the metallic film can be almost perfectly canceled by t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optics Express
سال: 2016
ISSN: 1094-4087
DOI: 10.1364/oe.24.006359