Sulfur speciation in untreated and alkali treated ground-granulated blast furnace slag
نویسندگان
چکیده
منابع مشابه
Ground Granulated Blast Furnace Slag
1. Ground Granulated Blast Furnace Slag Ground Granulated Blast Furnace Slag (GGBFS) is a by product of the steel industry. Blast furnace slag is defined as “the non-metallic product consisting essentially of calcium silicates and other bases that is developed in a molten condition simultaneously with iron in a blast furnace.” [1] In the production of iron, blast furnaces are loaded with iron o...
متن کاملSoil Stabilisation Using Ground Granulated Blast Furnace Slag
Stabilisation is a broad sense for the various methods employed and modifying the properties of a soil to improve its engineering performance and used for a variety of engineering works. In today‟s day soil stabilisation is the major problem for civil engineers, either for construction of road and also for increasing the strength or stability of soil and reduces the construction cost. In this t...
متن کاملStimulation Behaviour Study on Clay Treated with Ground Granulated Blast Slag and Groundnutshell Ash
The major decision in construction process involves the selection of suitable site with best soil conditions, as structure resides in the soil. Most problematic soils like expansive soils hardly proved to be the best engineering subgrade profile for pavement constructions. Thus, this has undeniably led to the soil improvement options accompanying the reduction in resource depletion and solid wa...
متن کاملHigh Strength Concrete Incorporating Ground Granulated Blast Furnace Slag and Steel Fibres: A Review
This paper describes a review of the potential use of High Strength Incorporating Ground Granulated Blast Furnace Slag and Steel Fiber Reinforced Concrete used in construction industry to improve the structural strength and reduce steel reinforcements requirements. Blast furnace slag (GGBS) has been used as a supplementary material along with the cement. It helps in increasing the durability an...
متن کاملProperties of Foamed Mortar Prepared with Granulated Blast-Furnace Slag
Foamed mortar with a density of 1300 kg/m³ was prepared. In the initial laboratory trials, water-to-cement (w/c) ratios ranging from 0.54 to 0.64 were tested to determine the optimal value for foamed mortar corresponding to the highest compressive strength without compromising its fresh state properties. With the obtained optimal w/c ratio of 0.56, two types of foamed mortar were prepared, name...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Science of The Total Environment
سال: 2017
ISSN: 0048-9697
DOI: 10.1016/j.scitotenv.2017.02.163