Sulfonated carbon black-based composite membranes for fuel cell applications
نویسندگان
چکیده
منابع مشابه
Sulfonated Polysulfone/POSS Nanofiber Composite Membranes for PEM Fuel Cells
D Sulfonated Polysulfone/POSS Nanofiber Composite Membranes for PEM Fuel Cells Jonghyun Choi,* Kyung Min Lee, Ryszard Wycisk,** Peter N. Pintauro,** and Patrick T. Mather Department of Chemical Engineering, Case Western Reserve University, Cleveland, Ohio 44106, USA Department of Chemical and Biomolecular Engineering, Vanderbilt University, Nashville, Tennessee 37235, USA Syracuse Biomaterials ...
متن کاملNafion-layered sulfonated polysulfone fuel cell membranes
Sulfonated polysulfone (SPSU) with high ion exchange capacity (IEC) and ion conductivity was synthesized through deep sulfonation of polysulfone using the trimethysilyl chlorosulfonate as sulfonation agent. The silicon-containing compounds formed during the synthesis of SPSU were completely removed from the SPSU by simple evaporation. Water swelling, ion exchange capacity, conductivity and fuel...
متن کاملCharacterization of Polyethylene-Graft-Sulfonated Polyarylsulfone Proton Exchange Membranes for Direct Methanol Fuel Cell Applications
This paper examines polymer film morphology and several important properties of polyethylene-graft-sulfonated polyarylene ether sulfone (PE-g-s-PAES) proton exchange membranes (PEMs) for direct methanol fuel cell applications. Due to the extreme surface energy differences between a semi-crystalline and hydrophobic PE backbone and several amorphous and hydrophilic s-PAES side chains, the PE-g-s-...
متن کاملSulfonated poly(ether sulfone)/sulfonated polybenzimidazole blend membrane for fuel cell applications
0014-3057/$ see front matter 2010 Published b doi:10.1016/j.eurpolymj.2010.03.005 * Corresponding author. Tel.: +82 2 958 5299; fax E-mail address: [email protected] (H.-J. Kim). Polymer blending is used to modify or improve the dimensional and thermal stability of any two different polymers or copolymers. In this study, both sulfonated polybenzimidazole homopolymer (MS-p-PBI 100) and sulfonat...
متن کاملHigh conductivity perfluorosulfonic acid nanofiber composite fuel-cell membranes.
There is a need for polymeric hydrogen/air fuel-cell membranes that can efficiently conduct protons at moderate to high temperatures for wet and dry gas feeds. The US Department of Energy (DOE), for example, set an exceedingly stringent preliminary target for membrane conductivity, 0.10 Scm 1 at 120 8C and 50% relative humidity (RH). Herein, we describe the fabrication and basic properties of o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of Materials Science
سال: 2013
ISSN: 0250-4707,0973-7669
DOI: 10.1007/s12034-013-0512-x