Suitability of Self‐Reducing and Slag‐Forming Briquettes for Electric Arc Furnace Use Based on Laboratory Tests
نویسندگان
چکیده
The in-plant recycling routes of several side streams produced in Electric Arc Furnace (EAF) steelmaking remain under-explored. In article 2100472, Abdelrahim and co-workers characterize eight use them to produce seven different briquettes. Briquettes are assessed for their suitability be used EAF through a series mechanical high-temperature tests, reflecting intended use.
منابع مشابه
Electric Arc Furnace Slag and Blast Furnace Dust, Use for the Manufacture of Asphalt Concrete for Roads
This paper analyzes how feasible it is to use electric arc furnace slag as coarse aggregate, and blast furnace dust as fine aggregate in the manufacture of hot asphalt concrete for roads. Three mixtures were designed using the Ramcodes methodology, the M1 mixture of control with conventional materials, the M2 mixture replacing 50% and the M3 mixture replacing 100% of the conventional aggregates...
متن کاملVitrification of electric arc furnace dusts.
Electric arc furnace baghouse dust (EAFD), a waste by-product of the steelmaking process, contains the elements that are volatilized from the charge during the melting (Cr, Pb, Zn, Cu and Cd). The results of leaching tests show that the concentration of these elements exceeds the regulatory limits. Consequently, EAFD cannot be disposed of in ordinary landfill sites without stabilization of the ...
متن کاملDynamic Modeling of a Robot Manipulator for Opening the Tap Hole of an Electric Arc Furnace
The electric arc furnace (EAF) is used to produce high quality steel from steel scraps. The EAF uses plasma arc to generate heat for melting scarp or direct reduced iron (DRI). The liquid metal should be drained from the tap hole. Manual tapping operation of the EAF in the hot environment around the furnace is a potentially dangerous and time consuming task for the workers. Therefore, it is ess...
متن کاملRecycling Evaluation of Mill Scale in Electric Arc Furnace
A considerable amount of mill scale is generated from steelmaking plants annually. Although some industries use it as raw material however, since it contains iron in the form of FeO, Fe2O3, and Fe3O4, it can be considered as a valuable metallurgical raw material for iron and steelmaking industry as well. Thus, the aim of this study was to evaluate the possibility, efficiency, and consequences o...
متن کاملA Probabilistic Three-Phase Time Domain Electric Arc Furnace Model based on analytical method
An electric arc furnace (EAF) is known as nonlinear and time variant load that causes power quality (PQ) problems such as, current, voltage and current harmonics, voltage flicker, frequency changes in power system. One of the most important problems to study the EAF behavior is the choice of a suitable model for this load. Hence, in this paper, a probabilistic three-phase model is proposed base...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Steel Research International
سال: 2022
ISSN: ['1869-344X', '1611-3683']
DOI: https://doi.org/10.1002/srin.202270021