Suitability of Medium Density Fiber Board Made From Rubber Wood for Household and Industrial Use
نویسندگان
چکیده
The use of fiber board is increasing due to limited supply timer wood. This study investigated the suitability medium density (MDF) made from rubber wood for household and industrial use. Rubber was collected Bangladesh Forest Development Corporation (BFIDC), Chattogram. Single layer boards were fabricated by five different densities, such as 700, 725, 750, 775 800 kgm-3. mechanical physical properties fireboards a raw material urea formaldehyde resin studied. performance composite evaluated its properties. Experimental investigation indicated that strength modulus rupture (MOR) tensile increased with density. bending (188-234kgcm-2) passed Indian, German British standard while (4.20-4.70kgcm-2) Standard specification. research concluded 800kgm-3 had best (234 kgcm-2) highest (4.70 among all other single boards.
 J. Agril. Res. 46(2): 203-209, June 2021
منابع مشابه
Properties of medium - density particleboard from saline Athel wood
The Athel tree, Tamarix aphylla (L), can potentially be used as a biomass crop to help manage saline subsurface drainage water in arid land irrigated agriculture. In this study, Athel wood was used to manufacture medium-density particleboard with an aim of developing new applications for the saline wood. The research investigated the effects of different types of adhesives, particle sizes, bark...
متن کاملProperties of medium density fiberboards made from renewable biomass.
The goal of this study was to determine the comparative properties of dry-formed medium density fiberboards (MDF) made from renewable biomass (wheat and soybean straw) and those from conventional soft wood fiber. The MDF properties evaluated were modulus of elasticity, modulus of rupture, internal bond strength, thickness swell, and screw holding capacity. The results show that MDF made from wh...
متن کاملWays to Burn Wood For Industrial Use
Direct burning is the most familiar way of producing energy from wood. Forest products industries are the main users of wood as fuel on a large scale, because they have much woody debris left over from milling and harvesting. The basic strategy is to reduce leftover wood to walnut-size or smaller particles. This size reduction is usually done by a "hog." Large pieces enter the top of the hog an...
متن کاملFitting Weibull and Lognormal Distributions to Medium-density Fiberboard Fiber and Wood Particle Length
Fiber lengths were analyzed for random samples of medium-density fiberboard (MDF) fibers and wood particles taken from eleven different populations. For six of the samples, the lognormal distribution fit the data, while the Weibull distribution did not. For three of the samples, the Weibull fit the data, while the lognormal did not. For two of the samples, both the lognormal and Weibull fit the...
متن کاملinvestigation on physical and mechanical properties of medium density fiberboard (mdf) made from acacia salicina
in this research the utilization of acacia wood (acacia salicina) in medium density fiber board production was investigated. sample boards were made from acacia fibers at two resin contents (10, 12%), two press temperatures (175, 185 ˚c) and three press times(3, 4, 5 min). the results were analyzed based on a complete randomized design (crd) under a factorial experiment. results revealed that i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bangladesh Journal of Agricultural Research
سال: 2023
ISSN: ['0258-7122', '2408-8293']
DOI: https://doi.org/10.3329/bjar.v46i2.64123