Suitability of Hybrid Acacia Wood for Manufacturing Plywood and Particleboard
نویسندگان
چکیده
منابع مشابه
using hybrid of fish glue-phenol formaldehyde in plywood manufacturing
in this study, hybrid of phenol formaldehyde-fish glue was used to replace the chemical resin in plywood manufacturing. for this purpose, fish glue was applied at three levels including 0, 10 and 20 percent based on the dry weight of resin. physical and mechanical properties of manufactured plywoods were measured. thickness swelling after 2 and 24 hours immersion in tap water, bending strength,...
متن کاملProperties of medium - density particleboard from saline Athel wood
The Athel tree, Tamarix aphylla (L), can potentially be used as a biomass crop to help manage saline subsurface drainage water in arid land irrigated agriculture. In this study, Athel wood was used to manufacture medium-density particleboard with an aim of developing new applications for the saline wood. The research investigated the effects of different types of adhesives, particle sizes, bark...
متن کاملFormaldehyde emission from particleboard and plywood paneling: measurement, mechanism, and product standards
A number of commercial panel products, primarily particleboard and hardwood plywood, were tested for their formaldehyde emission behavior using desiccator, perforator, and dynamic chamber methods. The results were analyzed in terms of the source of formaldehyde observed in the tests (free vs. hydrolytically produced) and the potential utility of the testa as product standards for boards in mobi...
متن کاملProperties of particleboard made from recycled CCA-treated wood
Recovery of chromated copper arsenate (CCA)-treated wood for reuse has been the focus of several international research groups due to the imminent disposal problem created when large quantities of CCA-treated wood ultimately come out of service. Bioleaching with Bacillus licheniformis CC01 and oxalic acid extraction are two methods known to remove significant quantities of metals from CCA-treat...
متن کاملCharacteristics of Particleboard Made from Sedar Chips and Wood Slabs (TECHNICAL NOTE)
This study was Characteristics of manufacture particleboard (PB) from sedar and wood slab of impregnated with UF. The chips were divided into coarse chips with dimensions of 2-4 mesh and fine chips of 30–60 mesh, urea formaldehyde (UF) resin solution at concentrations of 45 %, and 55% sprayed on these chips about 1 min until 10% to dry weight chips, they were dried under 5% moisture in a dram d...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Bangladesh Academy of Sciences
سال: 2012
ISSN: 0378-8121
DOI: 10.3329/jbas.v36i2.12960