SUBSURCFACE MATERIAL CHARACTERISATION BY SIMULATION ON CARBURIZED ROLLING CYCLE FATIGUE TEST SPECIMENS
نویسندگان
چکیده
منابع مشابه
Effect of Ultrasonic Surface Treatment on Giga-cycle Fatigue Properties of a Rolling Stock Axle Material
In the past, components under fatigue loading were designed by using an S-N curve and endurance limit according to very high cycle fatigue tests [1-3], fatigue strength to failure at a given life decreases as loading cycles increase. In other words, endurance limit is not observed for most materials, which is true for axle materials for rolling stock. An axle is one of the key components for st...
متن کاملRolling Contact Fatigue Performances of Carburized and High-C Nanostructured Bainitic Steels
In the present work, the nanostructured bainitic microstructures were obtained at the surfaces of a carburized steel and a high-C steel. The rolling contact fatigue (RCF) performances of the two alloy steels with the same volume fraction of undissolved carbide were studied under lubrication. Results show that the RCF life of the carburized nanostructured bainitic steel is superior to that of th...
متن کاملHigh Cycle Fatigue Property of Carburized 20Cr Gear Steel under Axial Loading
Abstract: The high cycle fatigue property of carburized 20Cr gear steel was experimentally investigated under axial loading with a stress ratio of zero. The test results show that this steel exhibits gradually decreasing S-N characteristics, and the fatigue strength corresponding to 109 cycles is about 455 MPa. Based on the observation of fracture surfaces, the interior inclusion fisheye-induce...
متن کاملLow Cycle Fatigue Simulation of Valve Bridge Region in Cylinder Head Based on Critical Plane Model
The reason of this study is low cycle failure of cast iron cylinder head during the E5 standard durability test. The goal of the present investigation is durability test simulation and low cycle fatigue life evaluation of cast iron cylinder head. With uncouple structural analysis, preloads, thermal and mechanical load and boundary conditions are prescribed to finite element model of the cylinde...
متن کاملMaterial fatigue simulation using a periodic time homogenization method
This paper deals with the numerical simulation of combined cycle fatigue (CCF), which is characterized by two periodic loads, whose frequencies are very different one from the other. Rather than using classical fatigue life estimations, a time transient evolution model is solved using a periodic time homogenization method. This latter is based on the assumption that the time scales associated w...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Proceedings on Engineering Sciences
سال: 2019
ISSN: 2620-2832,2683-4111
DOI: 10.24874/pes01.01.087