Sub-domain scaling for finite element analysis of electrical machines

Finite-element Analysis of Machines

Implementation of a Moving Band Solver for Finite Element Analysis of Electrical Machines

The simulation of magnetically geared electrical machines using the finite element method is an especially demanding task when movement has to be considered. Several methods that facilitate movement exist and the most prominent ones are described in this paper. Based on the characteristics of these methods, the moving band is selected as the most appropriate for the simulation of magnetically g...

Matlab-Simulink Coupling to Finite Element Software for Design and Analysis of Electrical Machines

© 2012 Almandoz et al., licensee InTech. This is an open access chapter distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/3.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Matlab-Simulink Coupling to Finite Element Software for Design and Analysis of Elec...

Finite Element Analysis for CFST Columns under Blast Loading

The columns of frame structures are the key load-bearing components and the exterior columns are susceptible to attack in terrorist blasts. When subjected to blast loads, the columns would suffer a loss of bearing capacity to a certain extent due to the damage imparted which may lead to their collapse and even cause the progressive collapse of the whole structure . The concrete-filled steel col...

A New Stress Based Approach for Nonlinear Finite Element Analysis

This article demonstrates a new approach for nonlinear finite element analysis. The methodology is very suitable and gives very accurate results in linear as well as in nonlinear range of the material behavior. Proposed methodology can be regarded as stress based finite element analysis as it is required to define the stress distribution within the structural body with structural idealization a...