منابع مشابه
Towards Sub-10 nm Diameter III-V Vertical Nanowire Transistors
Towards the demonstration of sub-10 nm III-V vertical fin and nanowire MOSFETs, a novel alcohol-based digital-etch technology has been developed. The new technique minimizes the mechanical forces exerted on vertical nanowire structures. A consistent 1 nm/cycle etching rate on both InGaAs and InGaSb-based heterostructures has been obtained. This is the first demonstration of digital etch on anti...
متن کاملSub-10 nm self-enclosed self-limited nanofluidic channel arrays.
We report a new method to fabricate self-enclosed optically transparent nanofluidic channel arrays with sub-10 nm channel width over large areas. Our method involves patterning nanoscale Si trenches using nanoimprint lithography (NIL), sealing the trenches into enclosed channels by ultrafast laser pulse melting and shrinking the channel sizes by self-limiting thermal oxidation. We demonstrate t...
متن کاملMoS2 Field-Effect Transistor with Sub-10 nm Channel Length.
Atomically thin molybdenum disulfide (MoS2) is an ideal semiconductor material for field-effect transistors (FETs) with sub-10 nm channel lengths. The high effective mass and large bandgap of MoS2 minimize direct source-drain tunneling, while its atomically thin body maximizes the gate modulation efficiency in ultrashort-channel transistors. However, no experimental study to date has approached...
متن کاملLimiting factors in sub-10 nm scanning-electron-beam lithography
Achieving the highest possible resolution using scanning-electron-beam lithography SEBL has become an increasingly urgent problem in recent years, as advances in various nanotechnology applications F. S. Bates and G. H. Fredrickson, Annu. Rev. Phys. Chem. 41, 525 1990 ; Black et al., IBM J. Res. Dev. 51, 605 2007 ; Yang et al., J. Chem. Phys. 116, 5892 2002 have driven demand for feature sizes ...
متن کاملPlasmonic structures fabricated via nanomasking sub-10 nm lithography technique
Making use of a newly established nanomasking technique, nanoscale features (sub-10 nm) have been fabricated with the potential to act as plasmonic enhancement structures. The technique makes use of a two-step lithography process to simultaneously produce many plasmonic hotspots with two-dimensional features over a large area, showing promise for mass production scalability. This technique is h...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nature Photonics
سال: 2012
ISSN: 1749-4885,1749-4893
DOI: 10.1038/nphoton.2012.321