Study Structure and Properties of Nanocomposite Material Based on Unsaturated Polyester with Clay Modified by Poly(ethylene oxide)
نویسندگان
چکیده
منابع مشابه
Polyester Nanocomposite fibers with Antibacterial Properties
Antibacterial nanocomposite polyester (PET) fibres were melt spun by adding nano ZnO loaded Linear Low Density Polyethylene (LLDPE) master batch (MB) to the PET chips. The influence of content of nano ZnO on the antibacterial properties, crystallization behaviour and mechanical properties was studied. It was found that PET composite fibres having 1 % nano ZnO showed the optimum antibacterial ac...
متن کاملa study on construction of iranian life tables: the case study of modified brass logit system
چکیده ندارد.
15 صفحه اولSimulation and Modeling of Polyethylene/Clay Nanocomposite for Dielectric Application
Copyright ©2014 KIEEME. All rights reserved. This is an open-access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/3.0) which permits unrestricted noncommercial use, distribution, and reproduction in any medium, provided the original work is properly cited. pISSN: 1229-7607 eISSN: 2092-7592 DOI: http://dx...
متن کاملExperimental Study of Thermal Conductivity of Polyethylene Copper Oxide Nanocomposite
The demand for new, thermally conducting light weight and anti-corrosive materials is tried by incorporating Copper Oxide (CuO) nano powder in polyethylene matrix material. A laboratory level electro deposition technique is adopted here to prepare Copper Oxide (CuO) nano particles. Their phase composition is confirmed with X-Ray diffraction peaks and verified with standard JCPDS file for Copper...
متن کاملMechanical Properties of Unsaturated Polyester Resin
Mechanical behaviour of unsaturated polyester resin used for the composite materials has been studied to determine various important parameters, such as tensile and compressive, single edge-notch tensile fracture toughness, flexural properties and fracture energy. Fracture toughness, KIC, and fracture energy, GIC, obtained for the polyester resin lie between the typical values for epoxy resins ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Nanomaterials
سال: 2012
ISSN: 1687-4110,1687-4129
DOI: 10.1155/2012/841813