Study on Turbine Flow Through Guide Vanes and Stay Vanes for a Reversible Pump-Turbine : 1st Report, Potensial Theory
نویسندگان
چکیده
منابع مشابه
Fluid-structure coupling in the guide vanes cascade of a pump-turbine scale model
The present study concerns fluid-structure coupling phenomena occurring in a guide vane cascade of a pump-turbine scale model placed in the EPFL PF3 test rig. An advanced instrument set is used to monitor both vibrating structures and the surrounding flow. The paper highlights the interaction between vibrating guide vanes and the flow behavior. The pressure fluctuations in the stay vanes region...
متن کاملNumerical optimization of guide vanes and reducer in pump running in turbine mode
The main limitation of centrifugal pump running in turbine mode is lower efficiency at part load operating conditions as compared to conventional hydro turbines. To enhance the utilization of pump as turbine (PAT) in mini/micro hydropower plants, it is very important to improve its performance with some low cost modifications. The part load efficiency of PAT can be improved by guiding the flow ...
متن کاملOn Film Cooling of Turbine Guide Vanes - From Experiments and CFD-Simulations to Correlation Development
To achieve high thermal efficiency in modern gas turbines, the turbine-inlet temperature has to be increased. In response to such requisites and to prevent thermal failure of the components exposed to hot gas streams, the use of different cooling techniques, including film cooling, is essential. Finding an optimum film cooling design has become a challenge as it is influenced by a large number ...
متن کاملAn Investigation of Applicability of Transporting Water Mist for Cooling Turbine Vanes
This paper presents a numerical study to investigate the feasibility of transporting mist through the internal cooling channel in high-pressure turbine vanes for film cooling over the vane's surface. The idea of using mist film cooling to enhance conventional air cooling has been proven to be a feasible technique in the laboratory conditions and by computational simulations. However, there is a...
متن کاملFatigue Life Consumption for Turbine Blades-Vanes Accelerated by Erosion-Contour Modification
A new mechanism responsible for structural life consumption due to resonant fatigue in turbine blades, or vanes, is presented and explained. A rotating blade or vane in a gas turbine can change its contour due to erosion and/or material build up, in any of these instances, the surface pressure distribution occurring on the suction and pressure sides of blades-vanes can suffer substantial modifi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B
سال: 1981
ISSN: 0387-5016,1884-8346
DOI: 10.1299/kikaib.47.642